Sputnik
Large-diaphragm vacuum tube condenser microphone with three switchable polar patterns, a 6205M tube and a dedicated power supply. Aimed at studio vocal and instrument recording where a tube-condenser character is wanted.
- 1" evaporated-gold diaphragm, 3 micron
- Military-grade 6205M tube wired as a triode
- Cardioid, figure-eight and omni patterns
- Switchable 10 dB pad and 80 Hz filter
- Solid brass body and tuned brass backplate
- Includes power supply, 7-pin cable, shock mount, flight case
Fotos
5Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um Sputnik, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
Sputnik is a large-diaphragm tube condenser microphone built around a 1" evaporated-gold diaphragm, 3 microns thick. The signal path uses a hand-selected, military-grade 6205M pentode wired as a triode, mounted inverted and without a socket. The body and the tuned backplate are solid brass, and a dual-layer steel grille protects the capsule.
The polar pattern is switchable between cardioid, figure-eight and omni. A 10 dB pad raises the maximum SPL handling from 132 dB to 142 dB for 0.5% THD, and an 80 Hz high-pass filter (12 dB/octave) can be engaged to remove low-frequency rumble. Frequency response is 20 Hz to 20 kHz within ±1 dB, with a sensitivity of 30 mV/Pa and an equivalent noise level of 18 dB (A-weighted).
The microphone connects to its dedicated power supply through a supplied 7-pin cable, and the output is transformer isolated with a 200 Ω impedance. The package also includes a shock mount, a soft bag and a custom flight case.
Vídeo
Especificações
- Marca
- M-Audio
- Modelo
- Sputnik
- Categoria
- Estúdio › Microfones
Audio
- Type
- Large-Diaphragm Vacuum Tube Condenser Microphone
- Diaphragm
- 1" diameter; 3 micron evaporated 24 karat gold
- Tube
- Military-grade 6205M pentode, wired as a triode
- Polar pattern
- Cardioid / Figure-Eight / Omni (switchable)
- Frequency response
- 20 Hz-20 kHz; ± 1 dB
- Sensitivity
- 30 mV/Pa (-30.5 dB V)
- Max. SPL for 0.5% THD
- 132 dB; 142 dB using -10 dB Pad
- Equivalent noise level
- 18 dB, A weighted
- Pad
- Switchable 10 dB
- High-pass filter
- 80 Hz, 12 dB/octave, switchable
Outputs
- Output impedance
- 200 Ω; transformer isolated
- Recommended load impedance
- 1 kΩ
- Connector
- 7-pin cable
Power
- Power requirement
- Dedicated supply (provided)
Physical
- Dimensions (H x W x D)
- 8.25" x 3" x 2"
- Weight
- 1.6 lbs.
- Body
- Solid brass body; tuned solid brass backplate
- Grille
- Dual-layer steel
In the box
- Power supply
- Dedicated supply with 7-pin cable
- Shock mount
- Included
- Bag
- Soft bag included
- Case
- Custom flight case included