BX8 D3
The BX8 D3 is an 8-inch, two-way near-field powered studio monitor with a bi-amplified Class A/B design, intended for producers and engineers mixing in home or project studios. It has XLR and TRS balanced inputs and an Acoustic Space room control.
- 2-way near-field active monitor, 8-inch Kevlar woofer
- 1.25-inch natural silk dome tweeter in waveguide
- Bi-amplified Class A/B: 80 W LF + 70 W HF
- Frequency response 37 Hz – 22 kHz
- XLR and 1/4-inch TRS balanced/unbalanced inputs
- Acoustic Space control and front positioning LED
Снимки
7Обяви
Още няма обяви за този модел
Когато някой продаде BX8 D3, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
The BX8 D3 is an active two-way near-field reference monitor. An 8-inch Kevlar woofer handles low and mid frequencies, and a 1.25-inch natural silk dome tweeter handles the highs, with a crossover at 2.0 kHz. The tweeter sits in a computer-optimised waveguide to control dispersion, and a flared rear port is used for low-frequency extension. The cabinet is vinyl-laminated MDF.
Each driver has its own Class A/B amplifier: 80 W for the woofer and 70 W for the tweeter, 150 W in total. Rear controls include a volume knob and an Acoustic Space control for reducing bass build-up and standing-wave problems caused by the room. A front-mounted LED helps locate the best listening position, and the front baffle uses a fastenerless design with no visible driver screws.
Inputs are a balanced XLR and a balanced/unbalanced 1/4-inch TRS connector, so the monitor can be fed from audio interfaces, mixers, synthesizers and DJ equipment. Protection covers RF interference, output current limiting, over-temperature, turn on/off transients and subsonic content, plus an external mains fuse.
Видео
Спецификации
- Марка
- M-Audio
- Модел
- BX8 D3
- Категория
- Студио › Студийни монитори
Audio
- Type
- 2-way near-field studio reference monitors
- Frequency Response
- 37Hz – 22kHz
- Crossover Frequency
- 2.0kHz
- Maximum Peak SPL
- 114dB SPL - Full Bandwidth Pink Noise Measured
- Polarity
- Positive signal at + input produce outward LF cone displacement
Drivers
- Low Freq. Driver
- 8 inch (203 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround, magnetically shielded
- High Freq. Driver
- 1.25 inch (32mm) magnetically shielded natural silk dome
Amplification
- Low Freq. Amplifier Power
- 80W
- High Freq. Amplifier Power
- 70W
- Amplifier class
- Class A/B, bi-amplified
Inputs
- Input Connectors
- 1x XLR balanced input connector, 1x TRS balanced/unbalanced input connector
- Input Sensitivity
- -12dBU
- Input Impedance
- 10kΩ balanced, 20kΩ unbalanced
Controls
- Room adjustment
- Acoustic Space control
- Level
- Volume control
Protection
- Protection
- RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
Power
- Voltage
- 100–120V, 50/60 Hz / 220–240V, 50/60 Hz
- Consumption
- 150W
- Fuse
- 220–240V~ T1AL, 250V / 100–120V~ T2AL, 250V
Physical
- Cabinet
- Vinyl-laminated high-acoustic-efficiency MDF
- Dimensions (W x D x H)
- 9.8" x 11.9" x 15.1" / 250 x 302 x 384 mm
- Weight
- 23.1 lb / 10.5 kg