BX5 D3
A 2-way, bi-amplified near-field studio monitor with a 5-inch Kevlar woofer and a 1-inch silk dome tweeter, rated at 100 W. It suits home and project studios that need a reference monitor with XLR and TRS inputs and a room-matching control.
- 2-way near-field powered studio monitor
- 5" Kevlar woofer and 1" silk dome tweeter
- Bi-amplified Class A/B, 60 W LF + 40 W HF
- 52 Hz – 35 kHz frequency response
- XLR and 1/4" TRS balanced/unbalanced inputs
- Acoustic Space control and front positioning LED
Bilder
5Annonser
Ingen annonser for denne modellen ennå
Når noen selger en BX5 D3, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The BX5 D3 is a powered two-way near-field monitor. A 5-inch (127 mm) Kevlar woofer handles lows and mids, and a 1-inch (25 mm) natural silk dome tweeter sits in a computer-optimised waveguide. Each driver has its own Class A/B amplifier, 60 W for the woofer and 40 W for the tweeter, with a 2.5 kHz crossover between them. Frequency response is stated as 52 Hz to 35 kHz.
The cabinet is vinyl-laminated MDF with a rear-mounted bass port. Its front panel has a fastenerless keyhole design, so no driver screw heads are visible. A front LED lights when the speaker is at the ideal monitoring angle. An Acoustic Space control adjusts low-end output to suit the room, and a volume control sets playback level.
Inputs are on the rear panel: one balanced XLR and one balanced/unbalanced TRS (1/4-inch) connector. These allow connection to audio interfaces, mixers, synthesizers and DJ gear. The speaker runs from mains at 100–120 V or 220–240 V, 50/60 Hz. Protection includes RF interference, output current limiting, over-temperature, turn-on/off transient and subsonic filtering, plus an external mains fuse.
Video
Spesifikasjoner
- Merke
- M-Audio
- Modell
- BX5 D3
- Kategori
- Studio › Studiomonitorer
Audio
- Type
- 2-way near-field studio reference monitors
- Frequency response
- 52 Hz – 35 kHz
- Crossover frequency
- 2.5 kHz
- Maximum peak SPL
- 110 dB SPL - Full Bandwidth Pink Noise Measured
- Low frequency amplifier power
- 60 W
- High frequency amplifier power
- 40 W
Drivers
- Low frequency driver
- 5 inch (127 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround, magnetically shielded
- High frequency driver
- 1 inch (25 mm) magnetically shielded natural silk dome
- Polarity
- Positive signal at + input produces outward LF cone displacement
Inputs
- Input connectors
- 1x XLR balanced, 1x TRS balanced/unbalanced
- Input sensitivity
- -10 dBU
- Input impedance
- 10 kΩ balanced, 20 kΩ unbalanced
Controls
- Room adjustment
- Acoustic Space control
- Level
- Volume control
- Positioning aid
- Front panel LED
Power
- Voltage
- 100–120 V, 50/60 Hz / 220–240 V, 50/60 Hz
- Consumption
- 100 W
- Fuse
- 220–240 V~ T1AL 250 V / 100–120 V~ T1.6AL 250 V
- Protection
- RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
Physical
- Cabinet
- Vinyl-laminated high-acoustic-efficiency MDF
- Dimensions (W x D x H)
- 6.9" x 7.8" x 10" / 176 x 197 x 254 mm
- Weight
- 12.3 lbs, 5.6 kg