Rokit 10-3 G4
Large 10-inch, three-way powered mid-field studio monitor from KRK's ROKIT Generation 4 line, with Kevlar drivers, a 300 W Class D amplifier and DSP-driven onboard EQ. Aimed at producers and engineers who need extended low end in a mid-field setup.
- 10" woofer, 4.5" midrange and 1" tweeter, all Kevlar
- 300 W Class D tri-amp design
- Frequency response 26 Hz - 40 kHz, max SPL 112 dB
- DSP graphic EQ with 25 settings and LCD
- Rotatable mid/high drivers for vertical or horizontal use
- Balanced TRS/XLR combo input
Fotók
8Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy Rokit 10-3 G4 modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The ROKIT 10-3 G4 is a tri-amp powered monitor with a 10" woofer, a 4.5" midrange and a 1" tweeter. All three drivers use Kevlar cones, which keeps the tonal character consistent across the frequency range. A 300-watt Class D amplifier drives the system, and a brickwall limiter engages at maximum amp level to protect the monitor and preserve dynamics.
A DSP-driven graphic EQ with 25 settings is shown on a built-in LCD and is meant to help adapt the monitor to the room. The enclosure has a low-resonance design with a front-firing port, which allows flexible placement, and a high-density Iso-foam pad reduces vibration transfer to the surface underneath. The midrange and tweeter can be rotated, so the monitor can be used standing vertically or lying horizontally.
Audio comes in over balanced TRS/XLR combo jacks. A companion KRK mobile app for Android and iPhone provides real-time spectral analysis to help with monitor placement, level matching and subwoofer level setting.
Videó
Műszaki adatok
- Márka
- KRK
- Modell
- Rokit 10-3 G4
- Kategória
- Stúdió › Stúdiómonitorok
Audio
- Configuration
- 10" 3-way powered mid-field monitor
- LF driver
- 10"
- MF driver
- 4.5"
- HF driver
- 1"
- Driver material
- Kevlar®
- Frequency response
- 26Hz - 40KHz
- Max SPL
- 112 dB
- Onboard EQ
- DSP-driven graphic EQ, 25 settings, LCD
- Limiter
- Built-in brickwall limiter
Power
- Amplifier
- Class D, tri-amp
- Power output
- 300 Watts
Inputs
- Input connector
- Balanced TRS/XLR combo jacks
- Input impedance
- 5.12KΩ Balanced
Physical
- Height
- 21.50" / 546 mm
- Width
- 12.95" / 329 mm
- Depth
- 14.6" / 371 mm
- Weight
- 35.05 lb / 15.9 kg
- Port
- Front-firing
- Isolation
- High density Iso-foam pad
Software
- Companion app
- KRK App for Android and iPhone
In the box
- Quantity
- Single powered monitor