RP-504C
Klipsch Már nem gyártják

RP-504C

Center channel speaker from Klipsch's Reference Premiere series, built around four 5.25-inch woofers and a 1-inch titanium tweeter on a hybrid Tractrix horn. Intended for home theatre systems where clear dialogue and music vocals matter.

  • Four 5.25" spun copper Cerametallic woofers
  • 1" titanium LTS vented tweeter on hybrid Tractrix horn
  • 90° x 90° horn with molded silicone face
  • Bass-reflex with rear-firing Tractrix port
  • Ebony and Walnut finishes, removable magnetic grille
  • 6.81" x 31.13" x 14.46" (H x W x D)
Eladok egy ilyet

Fotók

7

Hirdetések

Ehhez a modellhez még nincs hirdetés

Ha valaki elad egy RP-504C modellt, itt jelennek meg a hirdetések és az eladási előzmények.

Eladok egy ilyet

Leírás

The RP-504C is a bass-reflex center channel speaker for a home cinema setup. It pairs four 5.25-inch spun copper Cerametallic woofers with a 1-inch vented titanium tweeter that has Linear Travel Suspension. The tweeter sits behind a 90° x 90° hybrid Tractrix horn with a moulded silicone face, which directs high frequencies toward the listening position and limits reflections from nearby walls.

The woofers use dual-layer copper-wound voice coils and stamped-steel baskets mounted to large magnet motors. Low-frequency output is tuned by a rear-firing Tractrix port, which is matched to the cabinet and drivers. Computer-modelled phase plugs act as a mechanical filter and protect the tweeter.

The cabinet comes in scratch-resistant Ebony and Walnut finishes and measures 6.81 x 31.13 x 14.46 inches. A removable magnetic grille covers the drivers. A spec sheet and a product manual are offered for download. The maker also lists a newer RP-504C II model.

Videó

Műszaki adatok

Márka
Klipsch
Modell
RP-504C
Kategória
Hi-Fi és otthoni hang › Hangfalak

Drivers

Tweeter
1" Titanium LTS vented tweeter
Tweeter horn
Hybrid Tractrix horn, 90° x 90°
Woofers
Quad 5.25" spun copper Cerametallic woofers
Woofer voice coil
Dual-layer, copper-wound
Woofer basket
Stamped steel, non-resonating
Tweeter magnet housing
Ceramic

Acoustic design

Speaker type
Center channel
Enclosure type
Bass-reflex
Port
Rear-firing Tractrix port
Tweeter diaphragm
Titanium with Linear Travel Suspension
Horn face
Compressed molded silicone
Phase plug
Computer-modelled

Physical

Dimensions (H x W x D)
6.81" x 31.13" x 14.46"
Finishes
Ebony, Walnut (scratch resistant)
Grille
Removable magnetic
Series
Reference Premiere

Documents

Spec sheet
RP 504 C Spec Sheet v01
Product manual
Reference Premiere Speakers Manual v03

Adatok: klipsch.com; fotók: Klipsch product page · frissítve: 2026-10-11 · Hibát találtál? Írj nekünk