R6 Meta
Flagship three-way centre channel speaker from KEF's R Series, built around a 12th generation Uni-Q driver array with Metamaterial Absorption Technology and two 6.5-inch hybrid aluminium bass drivers. Designed for home theatre use and for LCR setups alongside other R Series models.
- Three-way closed-box passive centre channel
- 12th gen Uni-Q array with MAT
- Two 165 mm (6.5 in.) hybrid aluminium bass drivers
- 65 Hz – 28 kHz (±3 dB) frequency response
- Suits 15–250 W amplifiers, 4 Ω nominal impedance
- Magnetic microfibre grille included
Fotók
8Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy R6 Meta modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The R6 Meta is a passive, closed-box centre channel speaker in KEF's R Series. It uses the same 12th generation Uni-Q driver array as the series' stereo models, so its tonality matches the other speakers in the range. The array combines a 25 mm vented aluminium tweeter dome with a 125 mm aluminium midrange cone, and it is supported by two 165 mm hybrid aluminium bass drivers.
Metamaterial Absorption Technology (MAT) is a maze-like structure behind the tweeter that is described as absorbing 99% of unwanted rear radiation, which reduces distortion. The Uni-Q array acts as a single point source, spreading sound more evenly so that the listening position matters less. The bass drivers have an aluminium skin over a paper cone for a stiff, piston-like movement.
The speaker works with 15–250 W amplifiers and has a nominal impedance of 4 ohms. It can be used in an LCR (Left-Centre-Right) configuration and is designed to perform with or without its magnetically attached microfibre grille. It is offered in Black Gloss, White Gloss and Walnut finishes.
Videó
Műszaki adatok
- Márka
- KEF
- Modell
- R6 Meta
- Kategória
- Hi-Fi és otthoni hang › Hangfalak
Audio
- Design
- Three-way closed box
- Type
- Passive HiFi speaker
- Frequency response
- 65 Hz - 28 kHz (±3db)
- Frequency range
- 55 Hz - 50 kHz (-6db)
- Typical in-room bass response
- 40 Hz (-6db)
- Sensitivity
- 88 dB (2.83v/1m)
- Nominal impedance
- 4 Ω (min. 3.2 Ω)
- Crossover frequency
- 500 Hz, 2.4 kHz
Drivers
- Driver array
- 12th generation Uni-Q with MAT
- HF
- 25 mm (1 in.) vented aluminium dome with MAT
- MF
- 125 mm (5 in.) aluminium cone
- LF
- 2 x 165 mm (6.5 in.) hybrid aluminium cone
Power
- Amplifier requirements
- 15 - 250W
Physical
- Dimensions (H x W x D)
- 200 mm x 625 mm x 339 mm (7.9 in. x 24.6 in. x 13.3 in.)
- Weight
- 17.8 kg (39.2 lbs)
- Finishes
- Black Gloss / White Gloss / Walnut
- Grille
- Magnetic microfibre grille
In the box
- Loudspeaker
- 1 unit of R6 Meta
- Grille
- 1 piece of microfiber grille
- Feet
- Rubber feet
- Documentation
- User manual and warranty information