KASA500
A two-channel Class-D amplifier rated at 250 W per channel, built to drive KEF Ci subwoofers. It suits installers and home-theatre or music sub/satellite systems that need a DSP-controlled amp with line- and speaker-level inputs.
- Class-D, 2 x 250 W into 4 ohms or bridged 1 x 500 W into 8 ohms
- DSP-controlled, optimised for KEF Ci subwoofers
- Line-level (stereo or mono LFE) and speaker-level inputs
- Crossover 40–140 Hz or software bypass
- Optional rack ears included, 2 EIA rack space
- Firmware updated via Windows-only Programmer over USB-A
Снимки
8Обяви
Още няма обяви за този модел
Когато някой продаде KASA500, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
The KASA500 is a Class-D system amplifier with two channels of 250 W each, or a bridged mono mode. Its DSP is tuned to get deep bass from KEF Ci subwoofers, and the firmware includes settings for several THX-certified Ci subwoofer models in both mono and stereo mode.
On the input side it accepts selectable stereo RCA line level, mono LFE at RCA level, or stereo speaker-level signals. The DSP can be configured for pass-through with optional high-pass filters, and the crossover covers 40 to 140 Hz or a software bypass. A 12 V trigger input is provided for switching.
The chassis is a 2 EIA rack-space unit, and optional rack ears are supplied. Firmware can be updated with the KASA500 Programmer, a Windows-only tool that connects to the amplifier over a USB Type A male to Type A male cable. A manual with home-theatre and sub/satellite installation diagrams and a dip-switch EQ chart are available for download.
Видео
Спецификации
- Марка
- KEF
- Модел
- KASA500
- Категория
- Hi-Fi и домашно аудио › Усилватели
Audio
- Amplifier class
- Class-D
- Power (<1% THD)
- 2 x 250 watts 4 ohms; Bridge 1 x 500 watts 8 ohms
- Crossover frequency
- 40 - 140Hz or software bypass
- Signal processing
- DSP controlled, configurable pass-through with optional high pass filters
Inputs
- Line inputs
- Selectable stereo RCA line level, or mono LFE RCA level
- Speaker inputs
- Stereo speaker level
- 12 V trigger input voltage
- 8 to 14 Volt DC @ 1.5mA max
- 12 V trigger connector
- 1/8" diameter female plug (tip positive or tip negative)
Connectivity
- Firmware update connection
- USB Type A male to USB Type A male cable
- Programmer software platform
- Windows only
Physical
- Weight
- 4 kg (9 lbs)
- Dimensions with feet (H x W x D)
- 92 x 432 x 304 mm (3⅝ x 17 x 12 in.)
- Dimensions with rack ears (H x W x D)
- 88 x 483 x 304 mm (3½ x 19 x 12 in.)
- Rack space
- 2 EIA rack space (with rack ears)
- Colour
- Black
Software
- Firmware revision available
- Rev. 10.05
- Supported THX subwoofer settings
- Ci3160RLb-THX, Ci250RRb-THX, Ci200QSb-THX, Ci200TRb, Ci4100QLb
- Firmware tool
- KASA500 Programmer
In the box
- Rack ears
- Optional rack mount ears included