Ci200QL
The Ci200QL is a rectangular in-ceiling or in-wall speaker with an 8-inch bass/midrange cone and a 1-inch Uni-Q tweeter at its centre. Its narrow visible rim suits installers and homeowners who want wide sound coverage with fewer speakers.
- Rectangular in-wall / in-ceiling architectural speaker
- 200 mm (8 in.) LF driver with 25 mm (1 in.) Uni-Q tweeter
- Ultra Thin Bezel for a minimal visible rim
- Frequency response 35Hz - 34kHz (±6dB) open backed
- Sensitivity 90dB (2.83V/ 1m)
- Suited to 10-150W amplifier power
Zdjęcia
8Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi Ci200QL, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The Ci200QL is a rectangular architectural loudspeaker for mounting in a wall or ceiling. It uses a Uni-Q driver array in which the 25 mm (1 in.) tweeter sits at the acoustic centre of the 200 mm (8 in.) bass/midrange cone, so both act as a single point source and spread sound widely and evenly through the room.
The Ultra Thin Bezel (UTB) design leaves only a very slim rim visible around the speaker. Combined with the wide dispersion, this gives freedom in placement and allows a room to be covered with fewer speakers. The speaker is rated for 35 Hz to 34 kHz (±6 dB) in open-backed use, with a sensitivity of 90 dB (2.83 V / 1 m) and a crossover frequency of 2.5 kHz.
The Ci200QL is a passive speaker and is driven by an amplifier rated for 10 to 150 W. It needs a cut-out of 334 mm x 238 mm and a mounting depth of 99.8 mm from the surface. Further details are available through KEF's Ci software download page.
Wideo
Specyfikacja
- Marka
- KEF
- Model
- Ci200QL
- Kategoria
- Hi-Fi i audio domowe › Głośniki
Audio
- Frequency response
- 35Hz - 34kHz (±6dB) open backed
- Sensitivity
- 90dB (2.83V/ 1m)
- Crossover frequency
- 2.5kHz
- Recommended amplifier power
- 10-150W
Drivers
- LF driver
- 200mm (8in.)
- HF driver
- 25mm (1in.) Uni-Q
- Driver array
- Uni-Q
- Bezel design
- Ultra Thin Bezel (UTB)
Installation
- Cut-out dimensions (H x W)
- 334 mm x 238 mm (13.15 in. x 9.37 in.)
- Mounting depth from surface
- 99.8mm (3.93in.)
- Type
- Architectural speaker, rectangular
Physical
- External dimensions (H x W x D)
- 369 mm x 273 mm x 106 mm (14.53 in. x 10.75 in. x 4.27 in.)
- Net weight
- 2.6kg (5.77lbs.)