Ci160CSDS
A thin-bezel, flush-mount in-ceiling speaker with two drive units that reproduces stereo from a single enclosure. It suits rooms where only one speaker position is available, including damp spaces such as bathrooms or areas under eaves.
- Dual stereo in-ceiling speaker for single-position rooms
- 160 mm LF and 19 mm HF drivers
- Screw-down clamp with moisture-resistant fixings
- Suitable for bathrooms and under eaves
- 194 x 194 mm cut-out, 84.5 mm depth without back can
- 91 dB sensitivity, 8 ohm nominal impedance
Fotky
8Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať Ci160CSDS, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The Ci160CSDS is a dual stereo in-ceiling speaker, meaning one enclosure is designed to recreate a stereo image where there is room for just a single speaker. It pairs a 160 mm (6.5 in.) low-frequency driver with a 19 mm (0.75 in.) high-frequency driver and has a thin bezel for a flush finish.
Installation uses a screw-down clamping system with moisture-resistant fixings, so the speaker can be fitted in environments such as bathrooms or beneath eaves. The cut-out is 194 mm x 194 mm, and the speaker needs 84.5 mm of mounting depth from the surface without the back can. External dimensions are 223 mm x 223 mm x 90.5 mm, and net weight is 1.80 kg.
Electrically it is a passive 8 ohm design with a sensitivity of 91 dB (2.83 V / 1 m) and a stated frequency response of 50 Hz to 20 kHz (±6 dB) when open backed. It is part of the maker's architectural speaker range, and software is available from the maker's Ci software download page.
Parametre
- Značka
- KEF
- Model
- Ci160CSDS
- Kategória
- Hi-Fi a domáce audio › Reproduktory
Audio
- Frequency response
- 50Hz - 20kHz (±6dB) open backed
- Sensitivity
- 91dB (2.83V/ 1m)
- Nominal impedance
- 8 Ohms
- Type
- Thin-bezel in-ceiling dual stereo speaker
Drivers
- LF driver
- 160mm (6.5in.)
- HF driver
- 19mm (0.75in.)
Installation
- Cut-out dimensions (H x W)
- 194 mm x 194 mm (7.64 in. x 7.64 in.)
- Cut-out remarks
- Without back can
- Mounting depth from surface
- 84.5mm (3.33in.) Without back can
- Mounting method
- Screw down clamping system with moisture-resistant fixings
Physical
- External dimensions (H x W x D)
- 223 mm x 223 mm x 90.5 mm (8.78 in. x 8.78 in. x 3.56 in.)
- Net weight
- 1.80kg (4.0lbs.)
- Range
- Architectural Speakers