Ci160CRds
Thin-bezel round-grille in-ceiling speaker with dual 19 mm aluminium dome tweeters and a 160 mm dual voice coil bass driver. It reproduces stereo from a single flush-mount unit, so it suits rooms with space for only one speaker, including bathrooms.
- Dual Stereo in-ceiling speaker for single-speaker locations
- Dual 19 mm aluminium dome tweeters with 'tangerine' waveguides
- 160 mm dual voice coil extended response bass driver
- 50 Hz - 20 kHz (±6 dB) open backed, 91 dB sensitivity
- 8 ohm; 10 - 80 W recommended amplifier power
- Ultra Thin Bezel; moisture-resistant clamp fixings
Снимки
8Обяви
Още няма обяви за този модел
Когато някой продаде Ci160CRds, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
The Ci160CRds is a flush-mount in-ceiling speaker from KEF's Dual Stereo range. Two tweeters and one woofer in a single housing recreate a stereo image from one ceiling position, which makes it useful where only one speaker can be installed.
The 160 mm (6.5 in.) extended-response bass driver has a dual voice coil. Two 19 mm (0.75 in.) aluminium dome tweeters sit on an asymmetrical tweeter island with 'tangerine' waveguides, aimed at a wide off-axis response. The crossover frequency is 3.2 kHz, and the stated frequency response is 50 Hz to 20 kHz (±6 dB) open backed. Sensitivity is 91 dB (2.83 V / 1 m) at 8 ohms nominal impedance, with 10 to 80 W of amplifier power recommended.
The speaker uses an Ultra Thin Bezel (UTB) and is fixed with a screw-down clamping system with moisture-resistant fixings, so it can be installed in humid spaces such as bathrooms or under eaves. The cut-out is 196 mm x 196 mm. Connection is by standard speaker cable from an external amplifier.
Видео
Спецификации
- Марка
- KEF
- Модел
- Ci160CRds
- Категория
- Hi-Fi и домашно аудио › Колони
Audio
- Frequency response
- 50Hz - 20kHz (±6dB) open backed
- Sensitivity
- 91dB (2.83V/ 1m)
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 3.2kHz
- Recommended amplifier power
- 10 - 80W
Drive units
- LF driver
- Dual voice coil 160mm (6.5in.) extended response bass driver
- HF drivers
- 2 x 19mm (0.75in.) aluminium dome tweeters
- Waveguide
- 'Tangerine' waveguides
- Tweeter layout
- Asymmetrical tweeter island for wide off-axis response
Installation
- Cut-out dimensions (H x W)
- 196 mm x 196 mm (7.71 in. x 7.71 in.)
- Cut-out note
- Without back can
- Mounting depth from surface
- Product only: 86mm (3.36in.)
- Mounting
- Screw down clamping system with moisture-resistant fixings
- Bezel
- UTB Ultra Thin Bezel
Physical
- External dimensions (H x W x D)
- 234.6 mm x 234.6 mm x 93 mm (9.24 in. x 9.24 in. x 3.66 in.)
- Net weight
- 1.80kg (4.0lbs.)
- Type
- Thin-bezel in-ceiling speaker
- Series
- Dual Stereo