Ci130QSfl
A square, frameless flush-mount architectural speaker from KEF's Ci-Q Series, built around a Uni-Q coincident driver and meant for walls or ceilings in new builds and retrofits. It suits installers and owners who want a discreet in-wall speaker.
- Square frameless flush-mount architectural speaker
- 130 mm Uni-Q driver with 19 mm tweeter
- Frequency response 45Hz - 34kHz (±6dB), open-backed
- Sensitivity 87 dB, 8 ohm nominal impedance
- Cut-out 158 x 158 mm, 101 mm mounting depth
- Round counterpart with same drivers: Ci130QRfl
Fotografije
8Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal Ci130QSfl, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The Ci130QSfl is a square in-wall and in-ceiling loudspeaker that sits flush with the surface and has no visible frame. It is intended for both new construction and retrofit work, and for interiors where a clean, minimal look matters. A round version with identical drivers is sold as the Ci130QRfl.
The speaker uses a Uni-Q driver array, in which the 19 mm tweeter sits at the centre of a 130 mm (5.25 in.) low/mid driver so both act as a single point source. Tangerine Waveguide technology is paired with the array to spread sound evenly through the room. The crossover point is 3.8 kHz, and the nominal coverage figure is 130.
It is a passive 8 ohm design with a sensitivity of 87 dB (2.83 V/1 m), and is used with an external amplifier rated for 10-100 W. A 50 Hz high-pass filter is recommended. It needs a cut-out of 158 x 158 mm and a rear volume of at least 10 litres, with 15 litres being ideal. Further details are available through the maker's Ci software download page.
Specifikacije
- Znamka
- KEF
- Model
- Ci130QSfl
- Kategorija
- Ozvočenje › Drugo ozvočenje
Audio
- Frequency response
- 45Hz - 34kHz (±6DB) Open-Backed; 38Hz-30kHz (-10DB)
- Sensitivity
- 87dB (2.83V/ 1m)
- Nominal impedance
- 8 Ohms
- Nominal coverage
- 130
- Maximum SPL measured at 1m
- 103 dB
- Crossover frequency
- 3.8kHz
Drivers
- LF driver
- 130mm (5.25in.) Uni-Q
- HF driver
- 19mm (0.75in.)
Amplification
- Recommended amplifier power
- 10-100W
- Recommended high-pass filter
- 50Hz
Installation
- Cut-out dimensions (H x W)
- 158 mm x 158 mm (6.22 in. x 6.22 in.)
- Mounting depth from surface
- 101mm (3.98in.)
- Ideal rear volume
- 15 L
- Minimum rear volume
- 10 L
Physical
- Net weight
- 1.6kg (3.53Ibs.)
- External dimensions (H x W x D)
- 200.5 mm x 200.5 mm x 103.6 mm (7.9 in. x 7.9 in. x 4.08 in.)
- Series
- Ci-Q Series
- Shape
- Square