Ci130QS
In-ceiling architectural speaker with a 130 mm bass/midrange driver and a 19 mm Uni-Q tweeter sitting at its acoustic centre. A thin bezel lets it sit almost flush in a wall or ceiling, aimed at custom installs and multi-room setups.
- Uni-Q array with 19 mm tweeter in the centre of the 130 mm driver
- Ultra Thin Bezel for near-flush wall or ceiling fit
- Frequency response 45 Hz - 34 kHz (±6 dB), open backed
- Sensitivity 87 dB (2.83 V / 1 m), crossover 3.8 kHz
- Suits 10 - 100 W amplifiers
- Cut-out 158 mm x 158 mm, mounting depth 77.9 mm
Снимки
8Обяви
Още няма обяви за този модел
Когато някой продаде Ci130QS, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
The Ci130QS is a round-fronted, square-framed flush-mount speaker for walls and ceilings. Its Uni-Q array places the tweeter at the centre of the bass/midrange cone, so both act as one point source and spread sound widely and evenly through the room. This allows fewer speakers to cover a space with a consistent sound-stage.
An Ultra Thin Bezel (UTB) design keeps the visible rim as slim as possible, giving freedom in where the speaker is placed. It is rated for 87 dB sensitivity and 10 to 100 W amplifier power, with a 3.8 kHz crossover and an open-backed frequency response of 45 Hz to 34 kHz (±6 dB).
The speaker is a passive model that connects to an external amplifier. It needs a 158 mm x 158 mm cut-out and 77.9 mm mounting depth. The maker supplies a cut-out template, minimum cabinet volume chart, spec sheets, manual, EASE GLL data and a product drawing as downloads. It is sold per piece.
Видео
Спецификации
- Марка
- KEF
- Модел
- Ci130QS
- Категория
- Hi-Fi и домашно аудио › Колони
Audio
- Frequency response
- 45Hz - 34kHz (±6dB) open backed
- Sensitivity
- 87dB (2.83V/ 1m)
- Crossover frequency
- 3.8kHz
- Recommended amplifier power
- 10 - 100W
Drivers
- LF driver
- 130mm (5.25in.)
- HF driver
- 19mm (0.75in.) Uni-Q
- Driver array
- Uni-Q
- Bezel design
- Ultra Thin Bezel (UTB)
Installation
- Cut-out dimensions (H x W)
- 158 mm x 158 mm (6.22 in. x 6.22 in.)
- Mounting depth from surface
- 77.9mm (3.07in.)
- Type
- Architectural speaker
Physical
- External dimensions (H x W x D)
- 184 mm x 184 mm x 84 mm (7.24 in. x 7.24 in. x 3.26 in.)
- Net weight
- 1.4kg (3.1lbs.)
- Unit measurement
- Piece
Downloads
- Documents
- Spec sheets, minimum cabinet volume chart, brochure, selection and setup guide, accessory guide, manual
- Installation files
- Cutout template, EASE GLL data, product drawing