Ci130.2CS
A 130 mm (5.25 in.) in-wall speaker with a Uni-Q coaxial driver, shallow mounting depth and a paintable magnetic grille. It suits custom-installation setups in homes, including areas exposed to moisture, thanks to its IP64 rating.
- 130 mm (5.25 in.) Uni-Q coaxial driver
- 16 mm aluminium dome tweeter with tangerine waveguide
- Mounting depth of 77.1 mm from the surface
- Weather resistant, IP64 certified
- Magnetic, paintable grille and bezel
- Recommended amplifier power 10-80 W
Zdjęcia
8Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi Ci130.2CS, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The Ci130.2CS is a round-baffle in-wall speaker from KEF's Ci-C Series, an entry point into custom-installation speakers. It uses a Uni-Q driver array in which the 16 mm aluminium dome tweeter sits at the acoustic centre of the 130 mm bass/midrange cone. The two act as a single point source, spreading sound widely and evenly through the room.
The speaker is built for unobtrusive installation. Its mounting depth from the surface is 77.1 mm, so it can fit in locations where other speakers of its class cannot. Ultra-Thin Bezels sit almost invisibly at the edge of an exceptionally flat grille. The grille is magnetic, and both the grille and bezel can be painted to match the wall.
The enclosure is open-backed and the speaker is weather resistant, with a treatment against moisture and UV light and an IP64 certification. It is a passive 8 ohm design that connects to an external amplifier rated for 10-80 W.
Specyfikacja
- Marka
- KEF
- Model
- Ci130.2CS
- Kategoria
- Hi-Fi i audio domowe › Głośniki
Audio
- Frequency response
- 52Hz-20kHz (+/-6dB) open-backed
- Sensitivity
- 87dB (2.83V/lm)
- Nominal impedance
- 8 Ohms
- Recommended amplifier power
- 10-80W
Drivers
- LF driver
- 130mm (5.25in.) Uni-Q
- HF driver
- 16mm (0.6in.)
- Tweeter
- 16mm (0.6in.) Aluminium dome tweeter with tangerine waveguide
Features
- Bezel
- UTB™ Ultra-Thin Bezel
- Grille
- Magnetic grille
- Finish
- Paintable grille and bezel
- Weather resistance
- Weather Resistant
- Ingress protection
- IP64 certified
Physical
- Cut-out dimensions (H x W)
- 158 mm x 158 mm (6.22 in. x 6.22 in.)
- Mounting depth from surface
- 77.1mm (3.03in.)
- External dimensions (H x W x D)
- 184 mm x 184 mm x 81 mm (7.24 in. x 7.24 in. x 3.19 in.)
- Net weight
- 1.2kg (2.7lbs)