
Ci130.2CR
The Ci130.2CR is a 5.25-inch round in-ceiling speaker from KEF's Ci-C architectural series, built around a Uni-Q coaxial driver array. It suits custom-install projects, including damp or UV-exposed rooms, and fits where installation depth is limited.
- 5.25 in. (130 mm) Uni-Q coaxial driver array
- 16 mm aluminium dome tweeter with waveguide
- IP64 certified, weather resistant
- 77.7 mm mounting depth from surface
- Magnetic, paintable grille and bezel
- 8 ohm, 87 dB sensitivity, 10-80 W amplifier
Снимки
8Обяви
Още няма обяви за този модел
Когато някой продаде Ci130.2CR, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
The Ci130.2CR is an in-ceiling speaker in KEF's Ci-C Series, the entry point to the maker's custom-installation range. It uses a Uni-Q driver array in which a 16 mm aluminium dome tweeter with a waveguide sits at the acoustic centre of the 130 mm bass/midrange cone. The two drivers act as a single point source, so sound spreads widely and evenly through the room.
The cabinet is very shallow, with a mounting depth of 77.7 mm from the surface, so it can go into ceilings where deeper speakers will not fit. The speaker has a weather-resistant treatment against moisture and UV light and an IP64 rating. Ultra-Thin Bezels and a flat magnetic grille keep it visually discreet, and both the grille and the bezel can be painted to match the ceiling.
It is a passive 8-ohm speaker for use with a separate amplifier rated at 10-80 W. Software for the Ci range is offered through the maker's Ci software download page.
Спецификации
- Марка
- KEF
- Модел
- Ci130.2CR
- Категория
- Жив звук › Друга техника за жив звук
Audio
- Frequency response
- 52Hz-20kHz (+/-6dB) open-backed
- Sensitivity
- 87dB (2.83V/ 1m)
- Nominal impedance
- 8 Ohms
- Recommended amplifier power
- 10-80W
Drivers
- LF driver
- 130mm (5.25in.) Uni-Q
- HF driver
- 16mm (0.6in.)
- Tweeter
- 16mm (0.6in.) Aluminium dome tweeter with tangerine waveguide
Features
- Bezel
- UTB™ Ultra-Thin Bezel
- Grille
- Magnetic grille
- Finish
- Paintable grille and bezel
- Weather resistance
- Weather Resistant
- Ingress protection
- IP64 certified
Physical
- Cut-out dimensions (H x W)
- 158 mm x 158 mm (6.22 in. x 6.22 in.)
- Mounting depth from surface
- 77.7mm (3.06in.)
- External dimensions (H x W x D)
- 193.4 mm x 193.4 mm x 82.3 mm (7.61 in. x 7.61 in. x 3.24 in.)
- Net weight
- 1.3kg (2.8lbs)