Blade Two Meta
Floor-standing three-way loudspeaker, a slightly smaller sibling of Blade One Meta, built around a Single Apparent Source layout with a 12th generation Uni-Q driver array and four force-cancelling bass drivers. Aimed at home hi-fi listeners who want a full-range tower with a sculptural cabinet.
- Three-way bass reflex floor-standing speaker, sold as a pair
- Single Apparent Source with 12th generation Uni-Q and MAT
- Four 165 mm force-cancelling aluminium bass drivers
- Frequency response 33 Hz - 35 kHz (±3 dB)
- Suits amplifiers rated 50-400 W
- Eight finishes plus custom Pantone enclosure colours
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine Blade Two Meta, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
Blade Two Meta is a three-way bass reflex floor-standing speaker that places a Uni-Q driver array, with a 25 mm aluminium dome tweeter and a 125 mm aluminium midrange cone, at the centre of four 165 mm aluminium bass drivers. This Single Apparent Source layout is intended to make the speaker act as one coherent source and to spread sound evenly, so listeners in different seats hear similar detail.
The 12th generation Uni-Q uses Metamaterial Absorption Technology (MAT), a maze-like structure that absorbs unwanted sound from the rear of the tweeter. The bass drivers are mounted back to back so their kinetic forces cancel, and each pair sits in its own chamber to limit interference between the drive units. The crossover has been revised to tidy up the signal path.
The speaker is a passive design for use with an external amplifier rated 50-400 W, sold as a pair. It is engineered and handcrafted in Maidstone, UK, and comes in eight two-tone finishes. A custom enclosure colour can be specified by supplying a Pantone reference, matched with one of six standard Uni-Q cone colours.
Físeán
Sonraíochtaí
- Branda
- KEF
- Samhail
- Blade Two Meta
- Catagóir
- Hi-Fi agus fuaim an tí › Callairí
Audio
- Design
- Three-way bass reflex, single apparent source
- Frequency response (±3dB)
- 33Hz - 35kHz
- Frequency range
- 30Hz - 45kHz
- Typical in-room bass response (-6dB)
- 25Hz
- Sensitivity (2.83V/1m)
- 86 dB
- Nominal impedance
- 4 Ω (min. 3.2 Ω)
- THD (90dB, 1m)
- <0.5% 40Hz - 100kHz; <0.2% 200Hz - 2kHz; <0.1% 2kHz - 20kHz
- Crossover frequency
- 450 Hz, 2.2k Hz
Drivers
- HF
- 25 mm (1 in.) aluminium dome with MAT
- MF
- 125 mm (5 in.) aluminium cone
- LF
- 4 x 165 mm (6.5 in.) aluminium cone, force cancelling
- Driver array
- 12th generation Uni-Q with MAT
Power
- Recommended amplifier power
- 50-400W
Physical
- Dimensions (H x W x D)
- 1461 mm x 338 mm x 475 mm (57.5 in. x 13.3 in. x 18.7 in.)
- Weight
- 35.5kg (77.8 lbs.)
- Finishes
- Piano Black/Copper, Piano Black/Grey, Frosted Blue/Blue, Frosted Blue/Bronze, Charcoal Grey/Red, Charcoal Grey/Bronze, Racing Red/Grey, Arctic White/Champagne
- Custom colour
- Pantone enclosure colour with any of six standard Uni-Q cone colours
- Sold as
- Pair
Software
- Downloads
- Information sheet, brochure, manual, white paper, EU declaration