Tuk
Kanto Audio Wycofany

Tuk

The Tuk 2nd Gen is a pair of powered Class D bookshelf speakers with AMT tweeters, 5.25-inch aluminum woofers and DSP tuning. It suits desktop and small-room hi-fi setups that need wired, USB, optical and Bluetooth inputs.

  • Class D with DSP, 260 W peak (130 W RMS)
  • 28 x 35 mm AMT tweeter with 5.25" Aircomb aluminum woofer
  • Bluetooth 5.4 with AptX Adaptive, AAC and SBC
  • USB-C and optical inputs, both 24 bit/96 kHz
  • Subwoofer out with selectable 80 Hz filter
  • Remote control and USB-A 5 V 2 A charge port

Zdjęcia

8

Ogłoszenia

Brak jeszcze ogłoszeń tego modelu

Gdy ktoś wystawi Tuk, ogłoszenia i historia sprzedaży pojawią się tutaj.

Sprzedaj taki sam

Opis

Tuk 2nd Gen is an active bookshelf speaker pair built around a 28 mm x 35 mm Air Motion Transformer tweeter and a 5.25-inch Aircomb aluminum woofer. Class D amplification with DSP and refined crossover tuning drives the pair, which has a re-engineered, hand-built cabinet.

Inputs include two RCA line-level pairs, optical (24 bit/96 kHz), USB-C (24 bit/96 kHz) and Bluetooth 5.4 with AptX Adaptive, AAC and SBC. The USB-C input lets a computer send audio digitally, bypassing its built-in sound card. A subwoofer output has a selectable 80 Hz high/low-pass filter, so bass can be handed to a separate sub.

The redesigned infrared remote controls volume, input, tone, balance and Bluetooth playback. A USB-A port provides 5 V, 2 A of charging power. The left and right channels can be swapped, and a threaded 1/4"-20 hole in the base allows mounting.

Wideo

Specyfikacja

Marka
Kanto Audio
Model
Tuk
Kategoria
Hi-Fi i audio domowe › Głośniki

Amplification

Amplifier class
Class D with DSP technology
Power
260 W Peak Power (130 W RMS)

Audio

Frequency response
50 Hz–22 kHz
High/low-pass filter
80 Hz (Selectable)
Tweeters
28mm x 35mm Air Motion Transformer (AMT)
Woofers
5.25" Aircomb™ Aluminum

Inputs

Line-level
2 x RCA
Optical
TOSLINK™ (24 bit/96 kHz)
USB-C
24 bit/96 kHz
Bluetooth
Bluetooth® 5.4 (AptX Adaptive, AAC, SBC)

Outputs

Subwoofer out
Subwoofer-Out with Selectable High/Low Pass Filter
USB-A charge
5 V, 2 A

Physical

Dimensions (W x D x H)
7.2" x 10" x 12" (18.4 x 25.4 x 30.5 cm)
Net weight (active)
12.4 lb (5.6 kg)
Net weight (passive)
11.4 lb (5.2 kg)
Mounting
¼"-20 Threaded Bottom Mounting Hole
Channels
Swappable Left/Right Channel

In the box

Speakers
Tuk Powered Bookshelf Speakers (pair)
Power cord
Included
Remote
Infrared Remote Control
Speaker wire
15' (5 m)
Cable
RCA to 3.5mm Cable 6' (1.8 m)
Feet
8x Silicone Rubber Feet
Documentation
Quick Start Guide

Dane: kantoaudio.com; zdjęcia: Kanto Audio product page · zaktualizowano 2026-10-09 · Widzisz błąd? Napisz do nas