Hirdetések
Van egy ilyened? Add el a Soundium Marketen
Fotók, ár, szállítás — 2 perc. A vevő a Soundiumon keresztül fizet, te a bankszámládra kapod a kifizetést.
Leírás
The AWC62 is a passive, full-range install speaker built around a coaxial driver pair: a 165 mm (6.5 in) woofer with a Kevlar-reinforced, weather-treated cone and a 25 mm (1 in) exit compression driver. A 3rd-order crossover at 1.8 kHz splits the two, and the pattern is held at 110° x 110°. The HF driver has SonicGuard overload protection. Frequency response is 100 Hz – 16 kHz (±3 dB), with a usable range of 70 Hz – 18 kHz (-10 dB).
It can be run directly at 8 ohms or through the built-in transformer on 70 V or 100 V lines, with taps from 15 W to 120 W. Sensitivity is 92 dB, and the power rating is 175 W for 2 hours or 120 W for 100 hours (IEC). The ABS enclosure sits behind a zinc-rich powder-coated steel grille. Environmental protection is IP56 when the speaker is aimed at least 5° downward, and it is rated above Mil Spec 810 for humidity, salt spray, temperature and UV.
Connection is through covered barrier strip terminals, with a gland nut that seals round cables of 4.0–9.0 mm outside diameter. Mounting uses the included U-bracket on two M10 fine-thread points, plus an M6 secondary safety point on the back panel. It comes in gray or black.
Műszaki adatok
- Márka
- JBL
- Modell
- AWC62
- Kategória
- Élő hang › PA-hangfalak
Audio
- Frequency range (-10 dB)
- 70 Hz – 18 kHz
- Frequency response (±3 dB)
- 100 Hz – 16 kHz
- Coverage pattern
- 110° x 110°
- Directivity factor (Q)
- 7.2 (1 k – 16 kHz)
- Directivity index (DI)
- 7.9 dB (1 k – 16 kHz)
- Sensitivity (2.83 V @ 1 m)
- 92 dB (Ave. 100 Hz – 18 kHz)
- Maximum SPL (1 m)
- Direct 8Ω: 114 dB (peaks of 120 dB); 120 W tap: 112 dB
- Crossover
- 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 3rd order low-pass to LF
- Crossover mode
- Passive
Drivers
- LF driver
- Kevlar-reinforced cone with weather treatment, 38 mm (1.5 in) voice coil
- HF driver
- 25 mm (1 in) diaphragm and voice coil diameter
- HF driver protection
- SonicGuard HF overload protection
Power
- System power rating
- 175 W 2 hrs, 120 W 100 hrs (IEC rated)
- Nominal impedance
- 8 ohms
- Transformer taps
- 70V: 120W, 60W, 30W, 15W; 100V: 120W, 60W, 30W
Connectivity
- Input connection
- Covered barrier strip terminals; gland nut seals cables 4.0–9.0 mm (0.16–0.36 in) OD
Physical
- Enclosure
- ABS with Glass enclosure
- Grille
- Zinc-rich extra-thick powder coated steel, 3-layer with foam and woven poly mesh backing
- Dimensions
- 259 x 259 x 255 mm (10.2 x 10.2 x 10.1 in)
- Net weight (each)
- 6.8 kg (15.0 lb), 7.7 kg (17.0 lb) with U-bracket
- Shipping weight
- 8.8 kg (19.5 lb)
- Colors
- Gray and black (-BK)
- Attachment
- Two M10 (fine-thread) points for U-bracket; M6 secondary safety point on back panel
Environmental
- Rating
- IP56 per IEC529, min. 5° downward aiming angle
In the box
- Included accessories
- U-bracket, matches loudspeaker color, zinc-rich powder coated steel
Kérdések
Még nincs kérdés — kérdezz elsőként.