Space 67
Tube studio condenser microphone with three switchable polar patterns, a -10 dB pad and a low cut filter, styled after a classic vintage tube mic. Aimed at studio recording of vocals, acoustic instruments and amplifiers.
- Tube condenser with EF86EH tube
- Omni, cardioid and figure-8 patterns
- Switchable -10 dB pad and low cut filter
- WIMA capacitors, Fairchild resistors, Cinemag transformer
- Max SPL 124 dB
- Includes power supply, shock mount and pop filter
Fotky
5Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať Space 67, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The Space 67 is a tube condenser microphone built around a pressure-gradient transducer with a shock-mounted capsule. It offers omnidirectional, cardioid and figure-8 patterns, plus a switchable -10 dB pad and a switchable low cut filter. It uses an EF86EH tube, and its signal path includes WIMA capacitors, Fairchild resistors and a Cinemag transformer.
The body is all metal with an electroplated finish. A magnetic pop shield is built into the design, and a shock mount is supplied. The low noise floor suits quiet and intimate material, and the mic is intended for vocals, acoustic instruments and amplifiers in a studio setting.
The microphone connects to the supplied power supply unit through a 7-pin cable. The power supply cabling comes from Gotham Audio, and the power supply has an XLR 3 F output. A metal storage case is also part of the package.
Video
Parametre
- Značka
- iCON
- Model
- Space 67
- Kategória
- Štúdio › Mikrofóny
Audio
- Acoustical operating principle
- Pressure gradient transducer
- Directional pattern
- Omnidirectional, cardioid, figure-8
- Frequency range
- 20 Hz-20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 15/24/16 mV/Pa ± 1 dB (Omni/cardioid/8)
- Equivalent noise level, CCIR
- 32/28/31 dB (Omni/cardioid/8)
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 73/77/74 dB (Omni/cardioid/8)
- Maximum SPL
- 124 dB
- Maximum output voltage
- -9.8 dBu
- Tube
- EF86EH
- Pad
- Switchable -10 dB
- Low cut filter
- Switchable
Outputs
- Rated impedance
- 200 ohms
- Rated load impedance
- 1 kohms
Connectivity
- Matching connector (microphone)
- spec. 7 pin
- Matching connector (power supply)
- XLR 3 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 3.5 mA
Physical
- Dimensions
- 60 mm x 60 mm x 216 mm (2.36" L x 2.36" W x 5.8" H)
- Weight
- 0.740 kg (1.63 lb)
In the box
- Included
- Space 67 microphone, 7-pin cable, pop filter, power supply, shockmount, quickstart guide