
Space 67
Tube studio condenser microphone with three switchable polar patterns, a -10 dB pad and a low cut filter, styled after a classic vintage tube mic. Aimed at studio recording of vocals, acoustic instruments and amplifiers.
- Tube condenser with EF86EH tube
- Omni, cardioid and figure-8 patterns
- Switchable -10 dB pad and low cut filter
- WIMA capacitors, Fairchild resistors, Cinemag transformer
- Max SPL 124 dB
- Includes power supply, shock mount and pop filter
Billeder
5Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en Space 67, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The Space 67 is a tube condenser microphone built around a pressure-gradient transducer with a shock-mounted capsule. It offers omnidirectional, cardioid and figure-8 patterns, plus a switchable -10 dB pad and a switchable low cut filter. It uses an EF86EH tube, and its signal path includes WIMA capacitors, Fairchild resistors and a Cinemag transformer.
The body is all metal with an electroplated finish. A magnetic pop shield is built into the design, and a shock mount is supplied. The low noise floor suits quiet and intimate material, and the mic is intended for vocals, acoustic instruments and amplifiers in a studio setting.
The microphone connects to the supplied power supply unit through a 7-pin cable. The power supply cabling comes from Gotham Audio, and the power supply has an XLR 3 F output. A metal storage case is also part of the package.
Video
Specifikationer
- Mærke
- iCON
- Model
- Space 67
- Kategori
- Studie › Mikrofoner
Audio
- Acoustical operating principle
- Pressure gradient transducer
- Directional pattern
- Omnidirectional, cardioid, figure-8
- Frequency range
- 20 Hz-20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 15/24/16 mV/Pa ± 1 dB (Omni/cardioid/8)
- Equivalent noise level, CCIR
- 32/28/31 dB (Omni/cardioid/8)
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 73/77/74 dB (Omni/cardioid/8)
- Maximum SPL
- 124 dB
- Maximum output voltage
- -9.8 dBu
- Tube
- EF86EH
- Pad
- Switchable -10 dB
- Low cut filter
- Switchable
Outputs
- Rated impedance
- 200 ohms
- Rated load impedance
- 1 kohms
Connectivity
- Matching connector (microphone)
- spec. 7 pin
- Matching connector (power supply)
- XLR 3 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 3.5 mA
Physical
- Dimensions
- 60 mm x 60 mm x 216 mm (2.36" L x 2.36" W x 5.8" H)
- Weight
- 0.740 kg (1.63 lb)
In the box
- Included
- Space 67 microphone, 7-pin cable, pop filter, power supply, shockmount, quickstart guide