Nova3
The NOVA3 is a large-diaphragm condenser microphone with a 34 mm double-sided capsule and switchable cardioid, omnidirectional and figure-8 patterns. It is aimed at vocals, broadcast, acoustic instruments and amplifier recording.
- 34 mm double-sided large-diaphragm capsule
- Cardioid, omnidirectional and figure-8 patterns
- Switchable -10 dB pad and low cut filter (below 100 Hz)
- Frequency range 20 Hz to 20 kHz
- +48 V phantom power, 3-pin XLR male output
- Includes shock mount, magnetic pop filter and metal case
Zdjęcia
7Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi Nova3, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The NOVA3 is a pressure-gradient electrostatic condenser microphone built around a hand-built, double-sided 34 mm large-diaphragm capsule that is shock-mounted inside the body. Three polar patterns can be selected: cardioid for vocals and general sources, omnidirectional for wide sources, rooms or moving performers, and figure 8 for duets or face-to-face interviews.
A 10 dB pad helps with loud sources such as guitar cabinets, loud singers or a drum kit. A low cut switch removes content below 100 Hz to reduce low-frequency rumble. Components include Wima capacitors and Fairchild resistors, and the body has an electroplated finish.
The microphone outputs on a 3-pin XLR male connector and runs on +48 V phantom power with a current draw of 4 mA or less. It ships with a suspension shock mount, a magnetic slip-on pop filter and a metal storage carry case. User manuals are available in six languages.
Wideo
Specyfikacja
- Marka
- iCON
- Model
- Nova3
- Kategoria
- Studio › Mikrofony
Audio
- Transducer type
- Electrostatic
- Operating principle
- Pressure Gradient
- Diaphragm active diameter
- 34 mm
- Frequency range
- 20 Hz to 20 kHz
- Polar patterns
- Cardioid, Figure 8, Omnidirectional
- Sensitivity (dB re 1V/Pa)
- (-37dBV/Pa)(-40dBV/Pa)(-38dBV/Pa)
- Sensitivity at 1 kHz into 1000 Ω load
- (-14,10,12.5)mV/Pa
- Maximum SPL for 0.5% THD at 1000 Ω load
- 144dB/ 147dB/ 147dB
- S/N ratio DIN/IEC 651 A-weighted
- 78dB/ 75dB/ 75dB
- Dynamic range of microphone preamplifier
- 128dB
Controls
- Pad
- -10 dB switchable
- Low cut filter
- Below 100 Hz
Inputs and Outputs
- Output impedance
- 50Ω
- Rated load impedance
- 1000Ω
- Suggested load impedance
- > 500Ω
- Output connector
- 3-pin XLR male
Power
- Phantom power voltage (pins 2 & 3 of XLR)
- +48V (+/-4V)
- Current consumption
- ≤ 4mA
Physical
- Dimensions
- 63mm x 60mm x 154mm
- Weight
- 0.394kg
In the box
- Mounting
- Suspension shock mount
- Pop filter
- Magnetic slip-on pop filter
- Case
- Metal storage carry case