Martian 2
Large-diaphragm electrostatic cardioid condenser microphone with Class A discrete electronics and a metal body. Aimed at voice and instrument recording, as a main or support mic, and supplied with a shockmount, pop filter and quickstart guide.
- 35 mm large-diaphragm electrostatic capsule
- Cardioid, pressure-gradient design
- Class A discrete electronics
- Swiveling head and metal body
- Needs 48 V phantom power, 3-pin XLR output
- Shockmount and metal pop filter included
Ritratti
5Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ Martian 2, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The Martian is a 35 mm large-diaphragm condenser with a pressure-gradient transducer and a cardioid pickup pattern, which helps isolate the sound source and reject feedback. The capsule is hand-built and shock-mounted internally. The circuit uses Class A discrete electronics, aimed at low self-noise and durability, and the voicing is described as warm and classic, suited to enriching low frequencies and refining strong transients.
The microphone has a metal body and a swiveling head that can be angled toward the sound source. A custom cradle adds further shock isolation and holds the supplied metal pop filter, which reduces plosives and unwanted vibration. Frequency response runs from 20 Hz to 20 kHz, with a maximum SPL of 134 dB at 0.5% THD and a dynamic range of 123.5 dB.
It connects through a 3-pin XLR male output and needs external 48 V phantom power, drawing under 3 mA. Manuals are offered in English, French, German, Italian, Japanese and Spanish.
Vidjo
Speċifikazzjonijiet
- Marka
- iCON
- Mudell
- Martian 2
- Kategorija
- Studio › Mikrofoni
Audio
- Transducer type
- Electrostatic
- Operating principle
- Pressure gradient
- Diaphragm active diameter
- 35 mm
- Polar pattern
- Cardioid
- Frequency range
- 20 Hz to 20 kHz
- Sensitivity at 1 kHz into 1000 Ω load
- 33 mV/Pa
- Maximum SPL for 0.5% THD at 1000 Ω load
- 134 dB
- S/N ratio
- 83.2 dB-A
- Equivalent noise level (DIN/IEC A-weighted)
- 10.5 dB-A
- Dynamic range
- 123.5 dB
Outputs
- Output connector
- 3-pin XLR male
- Output impedance
- 50 Ω
- Rated load impedance
- 1000 Ω
- Suggested load impedance
- > 250 Ω
Power
- Phantom power voltage (pins 2 & 3 of XLR)
- +48V (+/-4V)
- Current consumption
- < 3mA
Physical
- Weight
- 0.77kg (1.7lb)
- Dimensions (mm)
- 118mm x 78mm x 149mm
- Dimensions (inches)
- 4.65" (L) x 3.07" (W) x 5.87" (H)
In the box
- Microphone
- Martian microphone
- Pop filter
- Included
- Shockmount
- Included
- Documentation
- Quickstart Guide