
HP200
Closed-back, circumaural dynamic headphones with 40mm neodymium drivers, aimed at monitoring in recording studios and other professional listening setups. Supplied with a roughly 3 m cable and a 6.35mm adapter.
- Closed-back circumaural design
- 40mm neodymium dynamic drivers
- 16Hz–22kHz frequency response
- 32 ohm impedance, 98±3dB sensitivity
- About 3m straight OFC cable, 3.5mm plug
- 6.35mm adapter included
Fotók
6Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy HP200 modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The HP-200 is a closed-back, over-ear headphone built for monitoring work. Its closed enclosure and gradient cavity design are meant to keep outside noise out and send the signal straight to the listener, which suits studio recording, audio-visual work and other critical listening.
Sound comes from 40mm neodymium dynamic drivers with a lightweight voice coil and dual audio damping. Frequency response is stated as 16Hz to 22kHz, with 32 ohm impedance and 98±3dB sensitivity, so it can be driven by a wide range of sources. Rated power is 260mW, with a maximum of 600mW.
The headband and ear cushions are covered in leather, and the headband frame and moving arm are made of stainless steel. The headphone weighs 290g including its cable. The cable is about 3m of straight OFC copper and ends in a 3.5mm plug. A 6.35mm adapter is included for larger headphone outputs.
Műszaki adatok
- Márka
- iCON
- Modell
- HP200
- Kategória
- Fejhallgatók
Audio
- Operating principle
- Closed
- Fashion
- Circumaural
- Transducer type
- Dynamic
- Driver size
- 40MM
- Sensitivity
- 98±3dB
- Impedance
- 32ohm
- Frequency response
- 16HZ-22KHZ
Power
- Max. power
- 600MW
- Rating power
- 260MW
Connectivity
- Plug
- 3.5MM+6.3MM
- Cable
- About 3M (straight, OFC)
Physical
- Net weight
- 290g (with cable)
- Headband and ear cushions
- Leather
- Headband frame and moving arm
- Stainless steel
In the box
- Headphone
- HP200 Headphone
- Audio cable
- 3.5mm TRRS audio cable
- Adapter
- 6.35mm adapter
- Documentation
- Quickstart Guide