DT-S
Active two-way nearfield studio monitor line in 5.25", 6.5" and 8" woofer sizes, each with a 1" silk dome tweeter and a built-in bi-amp module. Aimed at mixing, mastering, broadcast and critical listening, with switchable room and voicing controls.
- Three sizes: DT-5S, DT-6S, DT-8S
- Active two-way design with built-in bi-amp module
- 1" silk dome tweeter, Nomex-reinforced paper cone woofer
- Balanced XLR input
- HPF Flat/60/80 Hz plus Bass/Mid/Treble ±2 dB switches
- Magnetically shielded and compensated drivers
Bilder
6Annonser
Ingen annonser for denne modellen ennå
Når noen selger en DT-S, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The DT-S is a family of active two-way nearfield monitors offered in three sizes: DT-5S, DT-6S and DT-8S. Each pairs a Nomex-reinforced paper cone woofer with a 1" soft fabric dome tweeter, and uses an internal bi-amp module that powers the woofer and tweeter separately. The cabinet is MDF with a tuned vent port, intended to improve low-end response with less port turbulence.
The rear panel carries a balanced XLR input, a power switch, and a stepped level encoder that runs from 0 dB down to mute. High-pass filter (Flat, 60 Hz or 80 Hz) and bass, midrange and treble switches (-2 dB, 0 dB, +2 dB) let the monitors be adjusted to the room or to a preferred voicing, from a flat response to a more aggressive profile.
The drivers are magnetically shielded and compensated. The range is suited to stereo and multichannel setups in recording, mixing, mastering and broadcast rooms. Vasorb rubber feet, a power cable and a quickstart guide are supplied.
Video
Spesifikasjoner
- Merke
- iCON
- Modell
- DT-S
- Kategori
- Studio › Studiomonitorer
Audio
- System
- Two-way active nearfield monitor
- Frequency response (±3 dB), DT-5S
- 45 Hz - 25 kHz
- Frequency response (±3 dB), DT-6S
- 45 Hz - 25 kHz
- Frequency response (±3 dB), DT-8S
- 35 Hz - 25 kHz
- Max SPL, pair at 2 m (IEC short term), DT-5S / DT-6S / DT-8S
- 113 dB / 116 dB / 120 dB peak
- Tuning frequency, DT-5S / DT-6S / DT-8S
- 50 Hz / 45 Hz / 40 Hz
- Crossover frequency, DT-5S / DT-6S / DT-8S
- 2.8 kHz / 2.5 kHz / 2.2 kHz
- Crossover slope
- 24 dB/oct (LP and HP)
- Magnetic shielding
- Shielded and Compensated
Drivers
- Tweeter
- 1" wide dispersion silk dome
- Woofer, DT-5S
- 5.25" Nomex paper cone
- Woofer, DT-6S
- 6.5" Nomex paper cone
- Amplifier power, DT-5S / DT-6S
- Tweeter 40 W / Woofer 80 W
- Amplifier power, DT-8S
- Tweeter 80 W / Woofer 150 W
Inputs
- Input connectors
- Balanced XLR
- Input level for 100 dB SPL @ 1 m (500-2000 Hz avg)
- 0 dBu RMS @ 0 dB level setting
Controls
- Power
- 2 pos switch (On/Off)
- Input sensitivity, DT-5S / DT-6S / DT-8S
- 20 / 21 / 22 pos encoder (0 dB to mute)
- High pass control
- 3 pos switch (Flat / 60 Hz / 80 Hz)
- Bass control
- 3 pos switch (-2 dB / 0 dB / +2 dB)
- Midrange control
- 3 pos switch (-2 dB / 0 dB / +2 dB)
- Treble control
- 3 pos switch (-2 dB / 0 dB / +2 dB)
Power
- Power consumption, DT-5S
- Idle: 15 W / Max: 120 W
- Power consumption, DT-6S
- Idle: 15 W / Max: 180 W
- Power consumption, DT-8S
- Idle: 15 W / Max: 230 W
Physical
- Dimensions (L x W x H), DT-5S
- 285 x 182 x 304 mm
- Dimensions (L x W x H), DT-6S
- 330 x 208 x 334 mm
- Dimensions (L x W x H), DT-8S
- 295 x 255 x 376 mm
- Weight, DT-5S / DT-6S / DT-8S
- 7.8 kg / 10.72 kg / 14.49 kg
- Enclosure
- MDF with tuned vent port
In the box
- Monitor
- DT-5S, DT-6S or DT-8S active studio monitor
- Vasorb rubber feet
- 4 pcs
- Cables and documents
- Power cable, Quickstart Guide