AirMon Pro
Compact 2.4GHz wireless headphone monitoring system with a transmitter and a receiver, for studio, recording and content-creation use. It lets any wired headphones with a 3.5mm plug work wirelessly, with up to 24-bit/96kHz stereo audio.
- Uncompressed digital audio up to 24-bit/96kHz stereo
- Latency under 5ms over a 2.4GHz link
- Sample rates: 32kHz mono, 48kHz mono, 96kHz stereo
- 16 selectable channels; up to 3 transmitters in one area
- Unlimited receivers per transmitter
- About six hours of use per charge, USB-C charging
Fotos
5Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um AirMon Pro, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
AirMon Pro is a transmitter and receiver pair for wireless monitoring in studio settings. The transmitter takes an audio source over a 3.5mm cable, and the receiver sends the signal to wired headphones plugged into its 3.5mm output. Stated latency is under 5ms, and the link is a digital 2.4GHz connection rather than Bluetooth.
The sample rate can be set to 32kHz mono, 48kHz mono or 96kHz stereo (16-bit for the mono modes, 24-bit for stereo). There are 16 selectable channels. Up to three transmitters can work in one location, depending on Wi-Fi signal, and any number of receivers can listen to one transmitter, which suits vocal booths and shared sessions. Pairing is done with a single button.
Both units have built-in rechargeable batteries and charge over USB-C. A Y cable is supplied to charge both at once. The receiver has a belt clip. Runtime is approximately six hours per charge. The box also includes a storage pouch, a quickstart guide and a pair of Scan 10 in-ear monitors. The unit is aimed at studio and content creation rather than stage work.
Vídeo
Especificações
- Marca
- iCON
- Modelo
- AirMon Pro
- Categoria
- Estúdio › Outro equipamento de estúdio
Audio
- Max resolution
- 24-bit/96kHz stereo
- Selectable sample rates
- 32K, 48K MONO or 96K STEREO
- Transmitter input level
- -3dBV
- Transmitter input impedance
- 10K ohm
- Receiver output level
- 16mW
- Receiver output impedance
- 32 ohm
Wireless
- Operating frequency
- 2400MHz-2483MHz
- Digital modulation
- GFSK
- Occupied bandwidth
- 4MHz +4MHz
- Transmission output
- 10mW
- Receiving sensitivity
- -85dBm
- Selectable channels
- 16 channel
Connectivity
- Receiver headphone output
- 3.5mm
- Charging connector
- USB Type-C
Power
- Transmitter current consumption
- 140mA
- Transmitter battery
- Built-in rechargeable LiPo, charged via USB 5V, 0.5A
- Transmitter battery operating time
- 7.3 hours for 1200 mA use
- Receiver current consumption
- 90mA
- Receiver battery
- Built-in rechargeable LiPo, charged via USB 5V, 0.5A
- Receiver battery operating time
- 8 hours for 1000 mA use
Physical
- Transmitter dimensions (WxDxH)
- 53x71x21mm (2.1"x2.8"x0.8")
- Transmitter weight
- 78.6g
- Receiver dimensions (WxDxH)
- 44x61x21mm (1.7"x2.4"x0.8")
- Receiver weight
- 41g
In the box
- Units
- AirMon Pro transmitter and receiver
- Accessories
- Storage pouch, Quickstart Guide, belt clip (affixed to receiver)
- Headphones
- Scan 10 In Ear Monitors
- Cables
- USB-C Y charging cable, 3.5mm to 3.5mm cable