Solidcom C1 PRO
A wireless intercom headset system with dual-mic environmental noise cancellation, designed for production crews working in loud settings. It runs on DECT 6.0 with up to 350 m line-of-sight range and can be used with or without a hub.
- Dual-mic ENC, about 20 dB noise reduction
- DECT 6.0, up to 1,100 ft (350 m) line of sight
- Non-hub packages for 2–8 members; hub system up to 9
- Hub adds A/B grouping, ANNOUNCE and USB audio
- About 170 g per headset, replaceable battery
- Compatible with the Solidcom C1 system
Fotók
7Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy Solidcom C1 PRO modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The Solidcom C1 Pro is a full-duplex wireless intercom headset system. Each headset has a directional main microphone plus an omnidirectional secondary microphone that samples ambient noise, and an ENC algorithm removes that noise on the speaker's side. Acoustic echo cancellation works across a 150 Hz to 7 kHz range, and a felt wind filter covers the main mic for outdoor use.
The system works in two ways. In the non-hub setup, a red-marked master headset links to blue-marked remote headsets, in packages for teams of 2 to 8. In the hub-based setup, a hub with a wired headset supports up to 9 members, A and B grouping, an ANNOUNCE function that mutes all other headsets, and cascading of up to 3 systems over IP. Master headsets cannot be used in a hub system.
The headsets weigh about 170 g with battery, use replaceable lithium batteries and are backward compatible with the Solidcom C1. The hub offers 2- and 4-wire audio I/O, USB audio for computer calls, and power from NP-F, V-mount, G-mount batteries or DC.
Videó
Műszaki adatok
- Márka
- Hollyland
- Modell
- Solidcom C1 PRO
- Kategória
- Élő hang › Vezeték nélküli rendszerek
Wireless
- Transmission range
- 1,100ft (350m) LOS
- Technology
- DECT 6.0
- Modulation mode
- GFSK
- RX sensitivity
- <-90dBm
- Frequency band (USA and Canada)
- 1920-1930 MHz
- Frequency band (Europe, Australia, much of Asia)
- 1880-1900 MHz (10 channels)
- Frequency band (Japan)
- 1893-1906 MHz (J-DECT)
- Frequency band (Brazil)
- 1910-1920 MHz (10 channels)
Audio
- Frequency response (ENC OFF)
- 150Hz–7kHz (fluctuation range: ±6dB)
- Frequency response (ENC ON)
- 150Hz–7kHz
- Signal-to-noise ratio
- 71±2dB@94dBSPL,1kHz
- Distortion
- <1%@94dBSPL, 150Hz–7kHz
- Microphone type
- Electret
- Input SPL
- >115dBSPL
- Output SPL
- 94±3dBSPL (@94dBSPL, 1kHz)
- ENC
- 20dB±2
Power
- Battery capacity
- 700mAh（2.66Wh）
- Remote headset operation time
- >10 hours (ENC ON)
- Master headset operation time (5 remotes)
- >5 hours (ENC ON)
- Master headset operation time (7 remotes)
- >4 hours (ENC ON)
- Charging time
- About 2.5 hours
- Hub power options
- NP-F battery, V-mount battery, G-mount battery, DC power
System
- Non-hub system team size
- 2 to 8 members
- Hub-based system team size
- Up to 9 members
- Hub cascading
- Up to 3 systems via IP network
Physical
- Net weight
- About 170g (6oz) with the battery included for each wireless headset
- Operating temperature
- 0℃ to 45℃
- Storage temperature
- –10℃ to 60℃
In the box
- Headset package
- Master & remote headsets, battery, microphone cushion, over-ear leather cushion, on-ear foam cushion, DC adapter, USB-A to Type-C cable, storage case, user manual, warranty card
- Hub package
- Hub, 0B10 wired headset, remote headset, high-gain antenna, battery, 12V2A DC adapter, USB-A to USB-C cable, storage case, user manual, warranty card