VR 11210
The VR 11210 is a passive two-way full-range loudspeaker with a 12" woofer and a 1" compression driver in a bass reflex MDF cabinet. It is meant for fixed installations in dry indoor spaces and is rated at 350 W RMS and 700 W program.
- Passive 2-way, 12" Sica woofer and 1" Celestion driver
- 350 W RMS / 700 W program / 1400 W peak
- Max. SPL peak 128 dB, sensitivity 98 dB
- Three horn variants, each rotatable by 90°
- Ball impact certified to DIN 18032-3
- Speakon NL4 input, screw terminal parallel output
Myndir
5Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur VR 11210 birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The VR 11210 is a passive two-way loudspeaker for permanent indoor installation. A 12-inch neodymium cone driver covers bass and midrange, and a 1-inch neodymium compression driver handles the highs. The two are split at 1.8 kHz with a 12 dB/octave passive crossover. The cabinet is a bass reflex design. The cabinet is rated at 350 W RMS, 700 W program and 1400 W peak, with a maximum peak SPL of 128 dB and a frequency range of 75 Hz to 16 kHz (-6 dB).
The horn comes in three variants, 60° x 40°, 90° x 55° or 60-90° x 55° asymmetric, and each can be rotated by 90°. This lets the coverage be matched to the room. The MDF enclosure has an acrylic enamel finish, a steel front grille with acoustic fabric, and rigging points on the sides, top, bottom and back. It is available in black, white or a special RAL colour, and it has been certified for ball impact resistance under DIN 18032-3.
Connection is through a Speakon NL4 input, with a parallel output on screw terminals under a contact protection cover. Amplifier presets and filter data are offered for Lab.gruppen, Lake, Powersoft Armonia+ and QSC Q-SYS, and mounting accessories exist for wall, ceiling and flown use.
Tækniupplýsingar
- Framleiðandi
- HK Audio
- Líkan
- VR 11210
- Flokkur
- Lifandi hljóð › PA-hátalarar
Audio
- Concept
- Passive 2-way mid/high unit
- Cabinet principle
- Bass reflex
- Power handling RMS
- 350 W
- Power handling program
- 700 W
- Power handling peak
- 1400 W
- Nominal impedance
- 8 Ohms
- Max. SPL peak
- 128 dB
- Sensitivity 1 W/1 m
- 98 dB
- Crossover frequency
- 1.8 kHz
- Frequency range -6 dB
- 75 Hz - 16 kHz
- Frequency range -10 dB
- 61 Hz - 20 kHz
- Dispersion angle -6 dB (H x V)
- depending on horn variant
Components
- Low frequency
- 1 x 12" Sica cone speaker with neodymium magnet and 3"-voice coil
- High frequency
- 1 x 1" Celestion compression driver with neodymium magnet and 1.4"-voice coil and ferrofluid
- Crossover
- High pass: 12 dB/oct., Low pass: 12 dB/oct.
- Horn
- 60° x 40° or 90° x 55° or 60-90° x 55° (asymm.), each 90° rotatable
Connectivity
- Input
- 1x Speakon NL4
- Output/parallel output
- 2x Screw terminals with contact protection cover
- Pin assignment
- 1+/- (Input)
Physical
- Cabinet material
- MDF
- Cabinet surface
- 1-component-acrylic enamel
- Color
- Jet black (RAL 9005), Signal white (RAL 9003) or special color according to catalog (over 30 colors)
- Front grille
- Steel front grille with anticorrosive coating and with external acoustic fabric, flame retardant as standard
- Rigging points
- 4 x M10 on the side, 6 x M10 Lid/bottom, 3 x M10 on the back
- Dimensions (W x H x D)
- 40.5 x 60.2 x 41.9 cm
- Weight
- 17.0 kg
Certifications
- Ball impact resistance (DIN 18032-3)
- certified (MPA Uni Stuttgart)
- IP-Protection class (EN 60529)
- not specified (installation only in dry indoor areas)