VR 11210
The VR 11210 is a passive two-way full-range loudspeaker with a 12" woofer and a 1" compression driver in a bass reflex MDF cabinet. It is meant for fixed installations in dry indoor spaces and is rated at 350 W RMS and 700 W program.
- Passive 2-way, 12" Sica woofer and 1" Celestion driver
- 350 W RMS / 700 W program / 1400 W peak
- Max. SPL peak 128 dB, sensitivity 98 dB
- Three horn variants, each rotatable by 90°
- Ball impact certified to DIN 18032-3
- Speakon NL4 input, screw terminal parallel output
Fotografije
5Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao VR 11210, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The VR 11210 is a passive two-way loudspeaker for permanent indoor installation. A 12-inch neodymium cone driver covers bass and midrange, and a 1-inch neodymium compression driver handles the highs. The two are split at 1.8 kHz with a 12 dB/octave passive crossover. The cabinet is a bass reflex design. The cabinet is rated at 350 W RMS, 700 W program and 1400 W peak, with a maximum peak SPL of 128 dB and a frequency range of 75 Hz to 16 kHz (-6 dB).
The horn comes in three variants, 60° x 40°, 90° x 55° or 60-90° x 55° asymmetric, and each can be rotated by 90°. This lets the coverage be matched to the room. The MDF enclosure has an acrylic enamel finish, a steel front grille with acoustic fabric, and rigging points on the sides, top, bottom and back. It is available in black, white or a special RAL colour, and it has been certified for ball impact resistance under DIN 18032-3.
Connection is through a Speakon NL4 input, with a parallel output on screw terminals under a contact protection cover. Amplifier presets and filter data are offered for Lab.gruppen, Lake, Powersoft Armonia+ and QSC Q-SYS, and mounting accessories exist for wall, ceiling and flown use.
Specifikacije
- Marka
- HK Audio
- Model
- VR 11210
- Kategorija
- Live zvuk › PA zvučnici
Audio
- Concept
- Passive 2-way mid/high unit
- Cabinet principle
- Bass reflex
- Power handling RMS
- 350 W
- Power handling program
- 700 W
- Power handling peak
- 1400 W
- Nominal impedance
- 8 Ohms
- Max. SPL peak
- 128 dB
- Sensitivity 1 W/1 m
- 98 dB
- Crossover frequency
- 1.8 kHz
- Frequency range -6 dB
- 75 Hz - 16 kHz
- Frequency range -10 dB
- 61 Hz - 20 kHz
- Dispersion angle -6 dB (H x V)
- depending on horn variant
Components
- Low frequency
- 1 x 12" Sica cone speaker with neodymium magnet and 3"-voice coil
- High frequency
- 1 x 1" Celestion compression driver with neodymium magnet and 1.4"-voice coil and ferrofluid
- Crossover
- High pass: 12 dB/oct., Low pass: 12 dB/oct.
- Horn
- 60° x 40° or 90° x 55° or 60-90° x 55° (asymm.), each 90° rotatable
Connectivity
- Input
- 1x Speakon NL4
- Output/parallel output
- 2x Screw terminals with contact protection cover
- Pin assignment
- 1+/- (Input)
Physical
- Cabinet material
- MDF
- Cabinet surface
- 1-component-acrylic enamel
- Color
- Jet black (RAL 9005), Signal white (RAL 9003) or special color according to catalog (over 30 colors)
- Front grille
- Steel front grille with anticorrosive coating and with external acoustic fabric, flame retardant as standard
- Rigging points
- 4 x M10 on the side, 6 x M10 Lid/bottom, 3 x M10 on the back
- Dimensions (W x H x D)
- 40.5 x 60.2 x 41.9 cm
- Weight
- 17.0 kg
Certifications
- Ball impact resistance (DIN 18032-3)
- certified (MPA Uni Stuttgart)
- IP-Protection class (EN 60529)
- not specified (installation only in dry indoor areas)