LUNAR 115 XA
Active 2-way 15-inch PA loudspeaker with 600 W RMS / 1200 W peak Class D amplification and DSP, rated to 130 dB peak SPL. It suits DJs, live acts and sound reinforcement users who want full-range output without an added subwoofer, or who want a system top.
- Active 2-way, 15" woofer plus 1" compression driver
- 600 W RMS / 1200 W peak Class D biamped amplifier
- Max SPL peak 130 dB
- Presets: Music, Ext. Sub, Monitor, Voice
- Bluetooth 5.4 with True Wireless Stereo
- Made in Germany, 5-year warranty on registration
Billeder
8Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en LUNAR 115 XA, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The LUNAR 115 XA is an active two-way bass-reflex loudspeaker built around a 15" cone driver with a 2.5" voice coil and a 1" compression driver on a constant directivity horn. The crossover sits at 1.9 kHz and uses a FIR filter with 60 dB/oct slope. A biamped Class D amplifier supplies 600 W RMS and 1200 W peak, and the DSP stage includes subsonic, peak, RMS and multiband limiting for driver protection.
Sound is shaped with four filter presets: Music, External Sub, Monitor and Voice. These cover full-range use, operation with a subwoofer, and floor-monitor duty, where the cabinet's 33° monitor angle applies. Processing is 32-bit with FIR filtering and phase correction, at a 48 kHz sample rate and 3 ms latency. Bluetooth 5.4 audio streaming is built in and supports True Wireless Stereo for pairing two units.
Two XLR/jack combo inputs accept mic or line signals. An XLR thru output and an XLR mix output allow daisy-chaining or feeding further speakers. The MDF cabinet has an acrylic enamel finish in jet black, a steel grille backed with acoustic foam, two SingleGrip handles, DuoTilt 3/7 and four M8 points for AP-8 mounting hardware.
Specifikationer
- Mærke
- HK Audio
- Model
- LUNAR 115 XA
- Kategori
- Live-lyd › PA-højttalere
Acoustic
- Concept
- Active 2-way loudspeaker
- Cabinet principle
- Bass reflex
- Max. SPL peak
- 130 dB (1 unit @ 1 m, 10 % THD, half space)
- Crossover frequency
- 1,9 kHz FIR X-Over with 60 dB/oct.
- Frequency range -6 dB
- 60 Hz - 21 kHz
- Frequency range -10 dB
- 56 Hz - 22 kHz
- Dispersion angle -6 dB (H x V)
- 90° x 55°
Components
- Mid/high frequency
- 1 x 15" cone speaker with 2.5" voice coil
- High frequency
- 1 x 1" compression driver with 1.4" voice coil
- Horn
- Constant directivity horn
Connections
- Analog input
- 2 x XLR/jack combo symm. (Mic/Line)
- Analog output
- 1 x XLR-Thru symm.
- Mix output
- 1 x Mix Out XLR symm.
- Power supply
- 1 x IEC connector
- Bluetooth
- Yes (5.4), TWS
Electronics
- Preamplifier
- DSP preamp
- Power amplifier
- Class D - Biamped
- Power amplifier output RMS
- 600 W
- Power amplifier output peak
- 1200 W
- Maximum input level
- 20 dBu
- Speaker protection
- Subsonic Filter, Peak and RMS Limiter, Multiband-Limiter
- Sample rate
- 48 kHz
- Latency
- 3ms
- Filter presets
- Music/Ext. Sub/Monitor/Voice
Power
- Power consumption (230 V)
- 0,5 A / 220-240 V AC @ 1/8 output power
- Power consumption (110 V)
- 0,9 A / 100-120 V AC @ 1/8 output power
Physical
- Cabinet features/rigging
- DuoTilt 3/7, 4 x M8 mounting point for AP-8, monitor angle 33°
- Carrying handles
- 2 x SingleGrip
- Cabinet material
- MDF
- Cabinet surface
- acrylic enamel
- Color
- Jet black (RAL 9005)
- Front grille
- Steel front grille, backed with acoustic foam
- Dimensions (W x H x D)
- 43 x 71.3 x 39.5 cm (16-59/64 x 28-3/64 x 15-33/64 inch)
- Weight
- 25.3 kg (55.78 lbs)