LINEAR 5 MK2 118 Sub HPA
Active 18-inch bass-reflex subwoofer with a 1500 W RMS Class D amplifier and DSP, the most powerful sub in the LINEAR 5 MK2 range. Suited to mobile and installed PA systems that need a 2.1 or cardioid sub setup.
- 18" driver with 4" voice coil, bass reflex
- 1500 W RMS / 3000 W peak Class D amplifier
- 131 dB peak SPL, 36 Hz (-6 dB) to crossover
- Cardioid presets and 10-band parametric EQ
- PowerCon In/Thru, Ethercon network, Milan
- 56.8 kg, birch plywood, rain cover set included
Ritratti
8Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ LINEAR 5 MK2 118 Sub HPA, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The LINEAR 5 MK2 118 Sub HPA is a self-powered bass-reflex subwoofer built around an 18-inch driver with a 4-inch voice coil. A Class D amplifier delivers 1500 W RMS (3000 W peak), and the cabinet reaches a peak SPL of 131 dB with a -6 dB range starting at 36 Hz.
On-board DSP provides a parametric 10-band EQ with variable filter characteristics, low-pass filter, polarity, level, delay, limiter and mute. Filter presets cover Front, Cardioid 1:1 vertical, Cardioid 2:1 vertical and Remote, so cardioid sub arrays can be set up without manual programming. The unit can be controlled from the HK Audio DSP CONTROL software on Windows and Mac. Stereo preamplifier inputs simplify 2.1 setups.
Power comes in through a PowerCon NAC3 input with a Thru connector for daisy-chaining. Audio connects via two XLR/jack combo inputs, with two XLR outputs and a separate DSP output on XLR. Two Ethercon ports handle network in and out, and the unit supports Milan digital audio transmission. The birch plywood cabinet has four MultiGrip handles and an M20 pole mount.
Speċifikazzjonijiet
- Marka
- HK Audio
- Mudell
- LINEAR 5 MK2 118 Sub HPA
- Kategorija
- Ħoss ħaj › Speakers PA
Audio
- Concept
- Active subwoofer
- Cabinet principle
- Bass reflex
- Max. SPL average
- 130 dB
- Max. SPL peak
- 131 dB
- Frequency range -6 dB
- 36 Hz - X-Over
- Frequency range -10 dB
- 33 Hz - X-Over
- Low frequency
- 1 x 18" cone speaker, 4" voice coil
Inputs
- Analog input
- 2 x XLR/jack combo symm.
- Network input
- 1 x Ethercon RJ45
- Maximum input level
- +20 dBu
Outputs
- Analog output
- 2 x XLR symm.
- DSP output
- 1 x XLR symm.
- Network output
- 1 x Ethercon RJ45
Amplifier and DSP
- Preamplifier
- DSP preamplifier
- Power amplifier
- Class D
- Power amplifier output RMS
- 1500 W
- Power amplifier output peak
- 3000 W
- Speaker protection
- RMS-/Peak-Limiter
- Sample rate
- 48 kHz
- Latency
- under 2.6 ms
- DSP functions
- parametric 10-band EQ with variable filter characteristics, low-pass filter, polarity, level, delay, limiter, mute
- Filter presets
- Front, Cardioid 1:1 vertical, Cardioid 2:1 vertical, Remote
Connectivity
- Digital audio transmission
- MILAN
- Remote software
- HK Audio DSP CONTROL (Windows, Mac OS)
Power
- Power supply
- 1 x Powercon NAC3 In, 1 x Powercon NAC3 Thru, 100-240 V
- Power consumption
- 2.5 A / 100-240 V nominal according to EN 62368-1
Physical
- Cabinet material
- Birch plywood
- Cabinet surface
- acrylic enamel
- Color
- Jet black (RAL 9005)
- Front grille
- Steel front grille with anticorrosive coating and backed acoustic foam
- Rigging
- 1 x pole mount M20
- Carrying handles
- 4 x HK Audio MultiGrip
- Dimensions (W x H x D)
- 60 x 60.8 x 79 cm (23-5/8 x 23-15/16 x 31-3/32 inch)
- Weight
- 56.8 kg (125.2 lbs)
In the box
- Accessories included
- RCS (Rain-Cover-Set)