FINEO FO S218
Passive dual 18-inch subwoofer from the FINEO series, intended for fixed installations such as sports halls, clubs and concert venues. It is designed to extend the low end of FO 12 and FO 15 systems in stereo, 2.1 or surround setups.
- 2x 18" Beyma woofers with 3" voice coils
- 2000 W RMS, 4000 W program, 8000 W peak at 4 ohms
- Max SPL peak 133 dB; response 37 Hz (-6 dB)
- Ball impact resistant per DIN 18032-3
- NL4 Speakon input and parallel output
- 73.9 kg; black or white; dry indoor install only
Photos
8Listings
No listings of this model yet
When someone sells a FINEO FO S218, the listings and the sales history will show here.
Sell one like thisDescription
The FO S218 is a passive, bass-reflex subwoofer built around two 18" Beyma cone drivers with ferrite magnets and 3" voice coils. It is rated at 2000 W RMS, 4000 W program and 8000 W peak into 4 ohms, with a maximum peak SPL of 133 dB and a low-frequency response reaching 37 Hz (-6 dB) and 33 Hz (-10 dB) up to the crossover point. Dispersion is omnidirectional.
The MDF cabinet has an acrylic enamel finish in jet black or signal white, with special colours available from the catalogue. A full-surface steel grille with acoustic foam backing and birch plywood and steel reinforcements protects the front, and the enclosure is certified for ball impact resistance under DIN 18032-3. It can stand upright or on its side, and milled cable ducts on the bottom, left and right allow wiring close to a wall.
There is no built-in crossover, so it needs an external amplifier with DSP. Connection is by NL4 Speakon, with one input and one parallel output. Presets are offered for Lab.gruppen IPX and LEA Sharkware, and filter sheets for several other processing platforms. Installation is for dry indoor areas only.
Specifications
- Brand
- HK Audio
- Model
- FINEO FO S218
- Category
- Live sound › PA speakers
General
- Concept
- Passive subwoofer
- Cabinet principle
- Bass reflex
- Low frequency
- 2x 18" Beyma cone speaker with ferrite magnet and 3" voice coil
- Crossover
- No integrated crossover
Audio
- Power handling RMS
- 2000 W
- Power handling program
- 4000 W
- Power handling peak
- 8000 W
- Nominal impedance
- 4 Ohms
- Max. SPL average
- 129 dB
- Max. SPL peak
- 133 dB
- Sensitivity 1 W/1 m
- 98 dB
- Frequency range -6 dB
- 37 Hz - crossover
- Frequency range -10 dB
- 33 Hz - crossover
- Dispersion angle -6 dB (H x V)
- omnidirectional
Connectivity
- Input
- 1 x NL4 Speakon
- Output/parallel output
- 1 x NL4 Speakon
- Pin assignment
- 2+/- (input/parallel output), 1+/- (looped through)
Physical
- Cabinet material
- MDF
- Cabinet surface
- 1-component acrylic enamel
- Color
- Jet black (RAL 9005), Signal white (RAL 9003) or special color according to catalog
- Dimensions (W x H x D)
- 112.8 x 60.8 x 72.1 cm (44-13/32 x 23-15/16 x 28-3/8 inch)
- Weight
- 73.9 kg (162.9 lbs)
Certifications
- Ball impact resistance (DIN 18032-3)
- certified (MPA Uni Stuttgart)
- IP-Protection class (EN 60529)
- not specified (installation only in dry indoor areas)
Software
- Amping/Presets
- Lab.gruppen IPX Series, LEA Professional Sharkware
- Filter sheets
- Biamp Tesira, BSS, Lab.Gruppen Lake, Linea Research, Marani, Powersoft, QSC Q-SYS, Ram Audio, Symetrix