FINEO FO S112
Compact passive 12-inch subwoofer in a bass-reflex cabinet, intended for fixed installations as a system subwoofer or surround LFE channel alongside small speakers such as the FO 5. It is omnidirectional and ball-impact certified for sports facilities.
- 12" Sica woofer with 2.5" voice coil, bass-reflex
- 600 W RMS / 1200 W program / 2400 W peak
- Max SPL 116 dB average, 120 dB peak
- NL4 Speakon input and parallel output
- No integrated crossover; DSP presets available
- Ball-impact certified to DIN 18032-3
Fotók
8Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy FINEO FO S112 modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The FINEO FO S112 is a passive subwoofer built around a single 12" Sica cone driver with a ferrite magnet and a 2.5" voice coil, in a bass-reflex MDF cabinet. It is rated for 600 W RMS, 1200 W program and 2400 W peak, with a 8 ohm nominal impedance and a peak output of 120 dB SPL. Response is given as 61 Hz to crossover at -6 dB and 42 Hz to crossover at -10 dB.
The cabinet is compact and has a rear cable feed-through with cut-outs to the left, right or bottom, so cables can run close to the wall and the unit can sit flush against it. A secondary grille protects the bass reflex port from objects being pushed in, and the steel front grille is corrosion-coated and backed with acoustic foam. A ball-impact certificate to DIN 18032-3 is available for sports-facility installations. Finish is acrylic enamel in jet black or signal white, or a special colour from the catalogue.
Connection is by one NL4 Speakon input and one NL4 Speakon parallel output. There is no built-in crossover, so it needs an external amplifier with DSP. Presets are offered for Lab.gruppen IPX and LEA Sharkware, and filter sheets for several other platforms. It is for dry indoor installation only.
Videó
Műszaki adatok
- Márka
- HK Audio
- Modell
- FINEO FO S112
- Kategória
- Élő hang › PA-hangfalak
Audio
- Concept
- Passive subwoofer
- Cabinet principle
- Bass reflex
- Power handling RMS
- 600 W
- Power handling program
- 1200 W
- Power handling peak
- 2400 W
- Nominal impedance
- 8 Ohms
- Max. SPL average
- 116 dB
- Max. SPL peak
- 120 dB
- Sensitivity 1 W/1 m
- 91 dB
- Frequency range -6 dB
- 61 Hz - crossover
- Frequency range -10 dB
- 42 Hz - crossover
- Dispersion angle -6 dB (H x V)
- omnidirectional
Components
- Low frequency
- 1 x 12" Sica cone speaker with ferrite magnet and 2.5" voice coil
- Crossover
- No integrated crossover
Connectivity
- Input
- 1 x NL4 Speakon
- Output/parallel output
- 1 x NL4 Speakon
- Pin assignment
- 2+/- (input/parallel output), 1+/- (looped through)
Physical
- Cabinet material
- MDF
- Cabinet surface
- 1-component acrylic enamel
- Color
- Jet black (RAL 9005), Signal white (RAL 9003) or special color according to catalog
- Front grille
- Steel grille with anticorrosive coating, backed acoustic foam, steel reinforcements and secondary grille for bass reflex port
- Dimensions (W x H x D)
- 47.4 x 47.8 x 50.6 cm (18-21/32 x 18-13/16 x 19-29/32 inch)
- Weight
- 24.5 kg (54.0 lbs)
Certifications
- Ball impact resistance (DIN 18032-3)
- certified (MPA Uni Stuttgart)
- IP-Protection class (EN 60529)
- not specified (installation only in dry indoor areas)