ELEMENTS MK2 115 Sub A
Active 15-inch bass-reflex subwoofer with a 1500 W RMS Class D biamped amplifier and onboard DSP. It extends the low end of the ELEMENTS MK2 system for music and event use and can be networked over Milan AVB.
- 15" woofer with 3.5" voice coil, bass-reflex cabinet
- 1500 W RMS / 3000 W peak Class D biamped amplifier
- Frequency range 38 Hz (-6 dB) / 35 Hz (-10 dB) to crossover
- Milan AVB digital audio over Ethercon RJ45
- 10-band parametric EQ DSP with DSP-Control software
- 39.4 kg, hybrid housing with Multigrip handles
Grianghraif
6Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine ELEMENTS MK2 115 Sub A, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
The ELEMENTS MK2 115 Sub A is a powered subwoofer built around a single 15-inch woofer with a 3.5-inch voice coil in a bass-reflex cabinet. A Class D biamped amplifier delivers 1500 W RMS (3000 W peak). The response reaches down to 38 Hz at -6 dB and 35 Hz at -10 dB, and the passive crossover point to the satellite output is set at 175 Hz. Maximum SPL is 126 dB average and 128 dB peak.
A DSP preamp provides a 10-band parametric EQ with variable filter characteristics, high-pass and low-pass filters, polarity, a delay on the DSP output of up to 50 ms, a limiter and mute. Four filter presets are available: Flat, Contour, Voice and Remote. RMS and peak limiters protect the driver. The unit can be controlled from a computer with the DSP-Control software for Windows and Mac.
Connections include a balanced XLR/jack analog input, balanced XLR analog and DSP outputs, an E-Connect MK2 output for satellites, and two Ethercon RJ45 network ports for Milan AVB digital audio. The cabinet is a hybrid housing with water-based acrylic enamel, HK Audio Multigrip handles and a steel front grille with anticorrosive coating and acoustic foam backing. A top lid is included.
Sonraíochtaí
- Branda
- HK Audio
- Samhail
- ELEMENTS MK2 115 Sub A
- Catagóir
- Fuaim bheo › Callairí PA
System
- Concept
- Active subwoofer
- Cabinet principle
- Bass reflex
- Low frequency driver
- 1x 15" with 3,5" VC
- Crossover
- Active
- Crossover frequency
- 175 Hz
- Frequency range -6 dB
- 38 Hz - X-Over
- Frequency range -10 dB
- 35 Hz - X-Over
- Max. SPL average
- 126 dB
- Max. SPL peak
- 128 dB
- Max. SPL calculated
- 130 dB
Inputs and outputs
- Analog input
- 1 x XLR/jack balanced
- Analog output
- 1 x XLR balanced
- DSP output
- 1 x XLR balanced
- Satellite output
- 1 x E-Connect MK2
- Maximum input level
- 20 dBu
Connectivity
- Network input
- 1 x Ethercon RJ45
- Network output
- 1 x Ethercon RJ45
- Digital audio transmission
- Milan AVB
- Remote software
- DSP-Control
Audio
- Preamplifier
- DSP-preamp
- DSP functions
- Parametric 10-band EQ with variable filter characteristics, high-pass filter, low-pass filter, polarity, Delay DSP-Out (50 ms), limiter, mute
- Filter presets
- Flat, Contour, Voice, Remote
- Sample rate
- 48 kHz
- Latency
- 6 ms
- Speaker protection
- RMS-/Peak-Limiter
Power
- Power amplifier
- Class D - biamped
- Power amplifier output RMS
- 1500 W
- Power amplifier output peak
- 3000 W
- Power consumption
- 2,5 A / 100-240 V nominal according to EN 62368-1
- Power supply
- 1 x IEC 14
Physical
- Cabinet material
- Hybrid housing
- Cabinet surface
- Water based acrylic enamel
- Carrying handles
- HK Audio Multigrip
- Front grille
- Steel front grille with anticorrosive coating and backed acoustic foam
- Dimensions (W x H x D)
- 47,8 cm x 53,1 cm x 68,1 cm (18.82 inch x 20,9 inch x 26.81 inch)
- Weight
- 39,4 kg (86.86 lbs)
In the box
- Accessories included
- 1x Top Lid
Software
- DSP Control (Windows)
- 32/64 bit, v4.3.0.144084, 135.1 MB
- DSP Control (Mac)
- v4.3.0.144084, 146.9 MB