ELEMENTS MK2 110 Sub A
Compact active 10-inch subwoofer from the HK Audio ELEMENTS MK2 range, rated at 900 W RMS with a bass-reflex cabinet. It can stand upright or lie horizontally and is aimed at users building ELEMENTS MK2 PA systems.
- Active 10" bass-reflex subwoofer, 1x 10" with 2.5" voice coil
- 900 W RMS / 1800 W peak Class D biamped amplifier
- Max. SPL 122 dB average, 123 dB peak
- Milan AVB over Ethercon RJ45 in/out
- 2 x E-Connect MK2 satellite outputs
- Weighs 28.5 kg; usable upright or horizontal
Bilder
6Annonser
Ingen annonser for denne modellen ennå
Når noen selger en ELEMENTS MK2 110 Sub A, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The ELEMENTS MK2 110 Sub A is a self-powered bass-reflex subwoofer with one 10" driver on a 2.5" voice coil. A biamped Class D amplifier delivers 900 W RMS (1800 W peak). The response reaches down to 49 Hz (-10 dB) and the crossover frequency is 175 Hz. The cabinet can be used upright or horizontally, depending on the venue.
A DSP preamp provides a parametric 10-band EQ with variable filter characteristics, high-pass and low-pass filters, polarity, a DSP-out delay of up to 50 ms, a limiter and mute. Filter presets are Flat, Contour, Voice and Remote. Speaker protection is an RMS/peak limiter. Sample rate is 48 kHz and latency is 6 ms.
On the back there is a balanced XLR/jack analog input, balanced XLR analog and DSP outputs, and two E-Connect MK2 satellite outputs. Two Ethercon RJ45 ports carry Milan AVB digital audio and network control, and the unit is configured with the DSP-Control software for Windows and Mac. Power comes through an IEC inlet.
Spesifikasjoner
- Merke
- HK Audio
- Modell
- ELEMENTS MK2 110 Sub A
- Kategori
- Live-lyd › PA-høyttalere
System
- Concept
- Acitve subwoofer
- Cabinet principle
- Bass reflex
- Max. SPL average
- 122 dB
- Max. SPL peak
- 123 dB
- Max. SPL calculated
- 124 dB
- Crossover frequency
- 175 Hz
- Frequency range -6 dB
- 52 Hz - X-Over
- Frequency range -10 dB
- 49 Hz - X-Over
- Low frequency
- 1x 10" with 2,5" VC
- Crossover
- active
Connections
- Power supply
- 1 x IEC 14
- Analog input
- 1 x XLR/jack balanced
- Analog output
- 1 x XLR balanced
- DSP output
- 1 x XLR balanced
- Sattelite output
- 2 x E-Connect MK2
- Network input
- 1 x Ethercon RJ45
- Network output
- 1 x Ethercon RJ45
Electronics
- Preamplifier
- DSP-preamp
- Power amplifier
- Class D - biamped
- Power amplifier output RMS
- 900 W
- Power amplifier output peak
- 1800 W
- Power consumption
- 1,0 A / 100-240 V nominal according to EN 62368-1
- Maximum input level
- 20 dBu
- Speaker protection
- RMS-/Peak-Limiter
- Sample rate
- 48 kHz
- Latency
- 6 ms
- Digital audio transmission
- Milan AVB
- Filter presets
- Flat, Contour, Voice, Remote
- Remote software
- DSP-Control
Physical
- Cabinet material
- Hybrid housing
- Cabinet surface
- water based acrylic enamel
- Carrying handles
- 2 x Single Grip
- Front grille
- Steel front grille with anticorrosive coating and backed acoustic foam
- Dimensions (W x H x D), metric
- 32,8 cm x 48,6 cm x 67,3 cm
- Weight, metric
- 28,5 kg
In the box
- Accessories included
- 1x Top Lid