ELEMENTS MK2 110 Sub A
Compact active 10-inch subwoofer from the HK Audio ELEMENTS MK2 range, rated at 900 W RMS with a bass-reflex cabinet. It can stand upright or lie horizontally and is aimed at users building ELEMENTS MK2 PA systems.
- Active 10" bass-reflex subwoofer, 1x 10" with 2.5" voice coil
- 900 W RMS / 1800 W peak Class D biamped amplifier
- Max. SPL 122 dB average, 123 dB peak
- Milan AVB over Ethercon RJ45 in/out
- 2 x E-Connect MK2 satellite outputs
- Weighs 28.5 kg; usable upright or horizontal
Photos
6Listings
No listings of this model yet
When someone sells a ELEMENTS MK2 110 Sub A, the listings and the sales history will show here.
Sell one like thisDescription
The ELEMENTS MK2 110 Sub A is a self-powered bass-reflex subwoofer with one 10" driver on a 2.5" voice coil. A biamped Class D amplifier delivers 900 W RMS (1800 W peak). The response reaches down to 49 Hz (-10 dB) and the crossover frequency is 175 Hz. The cabinet can be used upright or horizontally, depending on the venue.
A DSP preamp provides a parametric 10-band EQ with variable filter characteristics, high-pass and low-pass filters, polarity, a DSP-out delay of up to 50 ms, a limiter and mute. Filter presets are Flat, Contour, Voice and Remote. Speaker protection is an RMS/peak limiter. Sample rate is 48 kHz and latency is 6 ms.
On the back there is a balanced XLR/jack analog input, balanced XLR analog and DSP outputs, and two E-Connect MK2 satellite outputs. Two Ethercon RJ45 ports carry Milan AVB digital audio and network control, and the unit is configured with the DSP-Control software for Windows and Mac. Power comes through an IEC inlet.
Specifications
- Brand
- HK Audio
- Model
- ELEMENTS MK2 110 Sub A
- Category
- Live sound › PA speakers
System
- Concept
- Acitve subwoofer
- Cabinet principle
- Bass reflex
- Max. SPL average
- 122 dB
- Max. SPL peak
- 123 dB
- Max. SPL calculated
- 124 dB
- Crossover frequency
- 175 Hz
- Frequency range -6 dB
- 52 Hz - X-Over
- Frequency range -10 dB
- 49 Hz - X-Over
- Low frequency
- 1x 10" with 2,5" VC
- Crossover
- active
Connections
- Power supply
- 1 x IEC 14
- Analog input
- 1 x XLR/jack balanced
- Analog output
- 1 x XLR balanced
- DSP output
- 1 x XLR balanced
- Sattelite output
- 2 x E-Connect MK2
- Network input
- 1 x Ethercon RJ45
- Network output
- 1 x Ethercon RJ45
Electronics
- Preamplifier
- DSP-preamp
- Power amplifier
- Class D - biamped
- Power amplifier output RMS
- 900 W
- Power amplifier output peak
- 1800 W
- Power consumption
- 1,0 A / 100-240 V nominal according to EN 62368-1
- Maximum input level
- 20 dBu
- Speaker protection
- RMS-/Peak-Limiter
- Sample rate
- 48 kHz
- Latency
- 6 ms
- Digital audio transmission
- Milan AVB
- Filter presets
- Flat, Contour, Voice, Remote
- Remote software
- DSP-Control
Physical
- Cabinet material
- Hybrid housing
- Cabinet surface
- water based acrylic enamel
- Carrying handles
- 2 x Single Grip
- Front grille
- Steel front grille with anticorrosive coating and backed acoustic foam
- Dimensions (W x H x D), metric
- 32,8 cm x 48,6 cm x 67,3 cm
- Weight, metric
- 28,5 kg
In the box
- Accessories included
- 1x Top Lid