COSMO C 10
Passive 2-way mid/high line array module with two 10" neodymium woofers and two 1.4" compression drivers, 60° horizontal dispersion. Intended for large events needing throws of 80 m and more, and can be combined with C 6 and C 8 units in mixed arrays.
- 2 x 10" and 2 x 1.4" B&C neodymium drivers
- 800 W RMS, 1600 W program, 3200 W peak
- Max. SPL peak 147 dB
- 60° x 10° dispersion, 80° with supplied brackets
- Mixes with COSMO C 6 and C 8 without adapters
- Birch plywood, 32.1 kg, 3-point rigging
Ritratti
5Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ COSMO C 10, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The COSMO C 10 is a passive, bass-reflex mid/high cabinet for flown or ground-stacked line arrays. It uses two 10" B&C cone speakers and two 1.4" B&C compression drivers, all with neodymium magnets, behind an MCT horn. The crossover sits at 850 Hz with 12 dB/oct. slopes. The cabinet is rated at 800 W RMS and 1600 W program, with a 147 dB peak SPL and a frequency range of 58 Hz to 18 kHz (-6 dB).
Horizontal dispersion is 60° by default. Supplied 80° brackets can be fitted to widen it to 80° x 10° in a pure C 10 array without losing useful output. The cabinet fits together with C 6 and C 8 units without adapters or gaps, so it can serve as the top section of a mixed array. All COSMO cabinets share the same dimensions, which simplifies storage and transport.
The cabinet is built from birch plywood with a PU coating and a steel front grille backed with acoustic foam. It has 3-point rigging hardware and four integrated handles. Connection is by NL4 Speakon input and parallel output, with switchable pin assignment. Presets are available for Lab.gruppen Lake and Powersoft Armonia+ amplifier platforms.
Vidjo
Speċifikazzjonijiet
- Marka
- HK Audio
- Mudell
- COSMO C 10
- Kategorija
- Ħoss ħaj › Speakers PA
Audio
- Concept
- Passive 2-way mid/high unit
- Cabinet principle
- Bass reflex
- Power handling RMS
- 800 W
- Power handling program
- 1600 W
- Power handling peak
- 3200 W
- Nominal impedance
- 8 Ohms
- Max. SPL average
- 137 dB
- Max. SPL peak
- 147 dB
- Sensitivity 1 W/1 m
- 108 dB
- Crossover frequency
- 850 Hz
- Frequency range -6 dB
- 58 Hz - 18 kHz
- Frequency range -10 dB
- 53 Hz - 19 kHz
- Dispersion angle -6 dB (H x V)
- 60° x 10° (opt. 80° x 10°)
Components
- Mid/high frequency
- 2 x 10" B&C cone speaker with neodymium magnet and 2.5"-voice coil
- High frequency
- 2 x 1.4" B&C compression driver with neodymium magnet and 3"-voice coil
- Crossover
- High pass: 12 dB/oct., Low pass: 12 dB/oct.
- Horn
- MCT-Horn
Connectivity
- Input
- 1 x NL4 Speakon
- Output/parallel output
- 1 x NL4 Speakon
- Pin assignment
- 1+/-, 2+/-, switchable
- Amp presets
- Lab.gruppen Lake, Powersoft Armonia+
Physical
- Rigging
- 3-point rigging hardware with black CDC coating
- Carrying handles
- 4 x integrated carrying handle
- Cabinet material
- Birch plywood
- Cabinet surface
- PU coating
- Color
- Jet black (RAL 9005)
- Front grille
- Steel front grille with anticorrosive coating and backed acoustic foam
- Dimensions (W x H x D)
- 60.0 x 32.2 x 47.5 cm (23-5/8 x 12-11/16 x 18-11/16 inch)
- Weight
- 32.1 kg (32.4 kg) / 70.8 lbs (71.4 lbs)