H100
The H100 is an integrated stereo amplifier from Hegel with a built-in USB sound card, rated at 2x120 W into 8 ohms and 2x220 W into 4 ohms. It suits listeners who want a powerful analog-input amp that can also play audio from a computer. It is listed as a discontinued model.
- 120 W + 120 W in 8 ohms, 220 W + 220 W in 4 ohms
- Built-in USB sound card, 16 bit / 48 kHz, no drivers needed
- 4 RCA inputs, 1 XLR balanced input and a Home Theatre input
- FET-based Hegel Next-Gen technology
- 2 RCA pre outs and 1 RCA recording output
- Listed as a discontinued model
Fotky
8Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať H100, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The H100 is a two-channel integrated amplifier that uses technology carried over from Hegel's Reference pre-amplifiers and power amplifiers. Compared with the H70, it has a larger power supply and twice as many output transistors. It also uses Hegel's FET-based Next-Gen technology, which is meant to reduce higher-order harmonic distortion.
A USB input with an on-board sound card lets a PC or Mac connect directly. It is plug and play, needs no drivers, and handles 16 bit / 48 kHz audio. Analog connections are four unbalanced RCA inputs and one balanced XLR input. A Home Theatre input has a fixed volume, so the H100 can act as the power amplifier in a system with a surround receiver.
Outputs are two RCA pre outs, one RCA recording output and a pair of heavy-duty gold-plated speaker terminals. The amplifier weighs 16 kg and draws 30 W in standby switched on.
Video
Parametre
- Značka
- Hegel
- Model
- H100
- Kategória
- Hi-Fi a domáce audio › Zosilňovače
Audio
- Output power
- 120W + 120W in 8 ohms, 220W + 220W in 4 ohms
- Analog frequency response
- Less than +/- 0.2 dB deviation 20Hz-20kHz
- Signal to noise ratio
- More than 100dB
- Crosstalk
- Less than -100dB
- Distortion
- Less than 0.005 % at 50W in 8 ohm
- Intermodulation
- Less than 0.01 % (19kHz + 20kHz)
- Damping factor
- More than 1000
Inputs
- Line inputs
- 4 Unbalanced (RCA), balanced (XLR) and USB
- Home Theatre input
- Maximum level power amp input (RCA)
- Input impedance
- Balanced 50kohm, unbalanced 11kohm
Outputs
- Pre outs
- 2 pcs (RCA)
- Recording output
- 1 pcs (RCA)
- Speaker outputs
- One pair of heavy duty gold plated terminals
Connectivity
- USB resolution
- 16 bit / 48 kHz, Plug & Play, no drivers needed
Power
- Power supply
- 630VA, 67 000uF capacitors
- Output stage
- 8 pcs 15A 150W high speed bipolar transistors
- Power consumption
- 30W in standby switched on
Physical
- Dimensions (ex feet)
- 10cm x 43cm x 42,5cm (HxWxD)
- Weight
- 16kg
- Dimensions US (ex feet)
- 4" x 17" x 16,7" (HxBxD)
- Weight US
- 35,2 lbs