32Cpre+
Single-channel 500 Series microphone preamp with a Jensen JT-MB-CPCA input transformer, taken from the Harrison 32Classic console. It adds Harrison high-pass and low-pass filters and a front-panel combo input, for studios using 500 Series racks.
- Jensen JT-MB-CPCA transformer-coupled mic preamp
- +20 to +70 dB of gain, suitable for ribbon mics
- Front combo XLR/¼" jack input
- HP 25 Hz–3.1 kHz and LP 160 Hz–20 kHz filters, 12 dB/oct
- HP filter with 3 dB resonant peak
- 48V, polarity, -20 dB pad and HiZ switches
Bilder
7Annonser
Ingen annonser for denne modellen ennå
Når noen selger en 32Cpre+, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The 32Cpre+ is a one-slot 500 Series module built around a Jensen JT-MB-CPCA transformer-coupled mic preamp. The circuit comes from the 32Classic console, which was inspired by the Harrison 3232. The 1:1 transformer gives a gentle roll-off at both ends of the spectrum and a slight phase shift. Gain runs from +20 to +70 dB, enough for a wide range of microphones, ribbons included.
The front panel carries a combo XLR/¼" jack input, so a microphone or instrument can be plugged in without reaching the rear of the rack. Switches cover 48V phantom power, 180° polarity reverse, a -20 dB pad and HiZ input impedance, and an LED indicates input overload.
The module also includes the Harrison filters from the 3232 and 32Classic. Both have a 12 dB/octave slope, and the high-pass filter has a 3 dB resonant peak. The high-pass range is 25 Hz to 3.1 kHz and the low-pass range is 160 Hz to 20 kHz. The module fits 500 Series format chassis.
Video
Spesifikasjoner
- Merke
- Harrison Audio
- Modell
- 32Cpre+
- Kategori
- Studio › Preamper og outboard
Inputs
- Input connector
- Front-mounted combo XLR with ¼" jack
- Input transformer
- Jensen JT-MB-CPCA, 1:1 ratio
- HiZ impedance switch
- Yes
- Pad
- -20 dB
- Phantom power
- 48V switch
Audio
- Gain range
- +20 to +70 dB
- Polarity reverse
- 180° switch
- Input overload indicator
- LED
Filters
- Filter slope
- 12 dB/octave
- High-pass filter range
- 25 Hz – 3.1 kHz
- High-pass filter resonant peak
- 3 dB
- Low-pass filter range
- 160 Hz – 20 kHz
Connectivity
- Format
- 500 Series module
- Compatibility
- 500 Series format chassis
Software
- User guide
- Available as download