Opus4
Opus4 is a wood-body moving iron phono cartridge and the entry model in Grado's Timbre Series. It has an elliptical diamond on an aluminum cantilever and suits turntable owners who want a balanced, natural sound. It comes in high-output, low-output and mono builds.
- American Maple wood body
- Moving iron design (flux-bridger principle)
- Elliptical diamond on aluminum cantilever
- High 4.0 mV and low 1.0 mV output builds
- Mono versions are special order, no returns
- Tracking force 1.6-1.9 g
Fotky
8Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať Opus4, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
Opus4 is a moving iron phono cartridge with an American Maple wood body. It is the starting point of the Timbre Series and uses Grado's flux-bridger principle, which keeps the coils fixed and the moving mass very low. The sound is described as balanced and controlled, with a warm midrange, defined bass and a smooth top end.
The stylus is a bonded elliptical diamond on an aluminum cantilever. Internal wiring uses 5N OCC copper, and each cartridge receives cryogenic treatment and internal damping to limit resonance. The wood housing is chosen to help control resonance across a range of tonearms.
It is built in high-output (4.0 mV) and low-output (1.0 mV) versions so it can work with a wide range of phono stages, and in mono high- and low-output special-order versions. It is insensitive to capacitive load, with a recommended input load of 10k-47k ohms. Owners of other Grado wood cartridges can use the maker's Wood Cartridge Upgrade Program.
Parametre
- Značka
- Grado
- Model
- Opus4
- Kategória
- DJ vybavenie › Prenosky a ihly
Electrical
- Output (high)
- 4.0mV @5 CMV (45)
- Output (low)
- 1.0mV @5 CMV (45)
- Inductance (high output)
- 55mH
- Inductance (low output)
- 6mH
- Resistance (high output)
- 660 ohms
- Resistance (low output)
- 70 ohms
- Input load
- 10k-47k ohms
- Capacitive load
- Non-sensitive
Audio
- Frequency response
- 10-60 kHz (controlled)
- Channel separation
- Average 30 dB, 10-30k Hz
- Compliance
- 20 μm/mN
Construction
- Body
- American Maple Wood
- Cantilever
- Aluminum
- Stylus
- Elliptical Diamond
- Generator type
- Moving iron
- Coil wire
- 5N OCC copper
- Treatment
- Cryogenic treatment and internal damping
Setup
- Tracking force
- 1.6-1.9 grams
Physical
- Cartridge weight
- 8.3 grams
- Builds
- High Output, Low Output, Mono
- Series
- Timbre Series