4430A
The 4430A is a compact two-way active installation loudspeaker that receives audio, power and management over a single network cable using Power over Ethernet. It is aimed at installers of distributed sound systems in venues, hospitality and exhibitions.
- Power, audio and control over one CAT cable (PoE+/PoE)
- 130 mm woofer and 19 mm metal dome tweeter
- 2 x 50 W Class D amplifiers, 2900 Hz crossover
- Peak SPL ≥107 dB; 45 Hz–39 kHz (-6 dB)
- AES67/Dante RJ45 input plus balanced analogue Euroblock input
- Configured with Smart IP Manager; public API for automation
Fotók
7Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy 4430A modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The 4430A is part of a networked loudspeaker family. It has a 130 mm cone woofer and a 19 mm metal dome tweeter, each driven by its own 50 W Class D amplifier through an active crossover at 2900 Hz. The die-cast aluminium enclosure uses a reflex port and a directivity control waveguide, and the speaker is rated for a peak SPL of at least 107 dB on PoE+ power.
A single CAT cable carries power (PoE+ or PoE) and audio. The network input handles Dante-compatible AES67 streams, and there is also a balanced analogue input on a Euroblock connector. Internal power management stores energy so the speaker can reach high peak levels from a standard PoE source; IEEE 802.3at (30 W) is recommended, while 802.3af (15 W) shortens how long maximum output can be sustained.
Setup is done with Smart IP Manager software, which covers device discovery, room equalisation, delay and level alignment, zone organisation and status monitoring. Settings are stored in the speaker's memory, and a public API command set allows control from house automation systems. The speaker is offered in black, white and RAL colours.
Műszaki adatok
- Márka
- Genelec
- Modell
- 4430A
- Kategória
- Élő hang › PA-hangfalak
Audio
- Frequency response
- 58 Hz - 20 kHz (± 1.5 dB)
- Low cutoff (-6 dB)
- 45 Hz
- High cutoff (-6 dB)
- 39 kHz
- Peak SPL
- ≥107 dB
- Short term max SPL
- ≥104 dB
- Long term max SPL
- ≥96 dB
- Self-generated noise
- ≤5 dB
- Harmonic distortion
- 50…200 Hz ≤2 %; > 200 Hz ≤0.5 %
- Group delay (analog input)
- 2.3 ms
- Crossover frequency (bass/treble)
- 2900 Hz
Drivers
- Woofer
- 130 mm cone
- Tweeter
- 19 mm metal dome
- Enclosure type
- Reflex port
- Enclosure material
- Die cast aluminium
Amplifier and power
- Bass amplifier
- 50 W Class D
- Treble amplifier
- 50 W Class D
- Power supply
- PoE+/PoE
- Power consumption, ISS active
- ≤4 W
- Power consumption, idle
- ≤5 W
- Power consumption, full output
- 25.5 W
Connectivity
- Network input
- 1 x RJ45, AES67 / Dante (Ethernet with PoE)
- Analog input
- 1 x Euroblock, 10 kOhm balanced
Physical
- Height
- 285 mm
- Width
- 189 mm
- Depth
- 178 mm
- Weight
- 5.1 kg (11.2 lb)
- Colour options
- Black, White, RAL colours