1236A
The 1236A is a very large, three-way active studio main monitor in the Genelec SAM range, with a separate rack-mounted amplifier unit and GLM network control. It is aimed at large control rooms where several listeners share one sweet spot.
- Three-way active main monitor with separate RAM-XL amplifier unit
- Class D amps: 2x1000 W bass, 2x400 W mid, 250 W treble
- Frequency response 17.5 Hz–26 kHz (-6 dB)
- Short term max SPL ≥130 dB at 1 m
- Analog XLR and AES/EBU XLR in, AES/EBU out, 2x RJ45 for GLM
- GLM/AutoCal room calibration needs a 9320A or GLM Calibration Kit
Fotografije
7Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal 1236A, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The 1236A is a floor-standing main monitor built around two 458 mm bass cones, two 125 mm midrange cones and a 25 mm compression tweeter in a reflex-ported MDF enclosure. Each driver group has its own Class D amplification and an active crossover, and a Directivity Control Waveguide shapes dispersion to give a wide listening area with flat off-axis response.
The amplifiers sit in a separate individually calibrated RAM-XL unit made up of three 3U rack-mounted modules: bass (2 x 1000 W), midrange (2 x 400 W) and treble (250 W). Driver protection circuitry limits output when levels or voice-coil temperatures reach safe limits, and Intelligent Signal Sensing puts the monitor into a low-power sleep state when no signal is present.
The monitor belongs to the Smart Active Monitoring family. Two RJ45 ports connect it to a GLM network, where the GLM software handles level, distance delay and room response compensation through AutoCal 2. Calibration needs GLM software plus either a 9320A SAM Reference Controller or a GLM Calibration Kit, both sold separately. Audio comes in over balanced analog XLR or AES/EBU digital XLR, and a digital XLR output passes the signal on.
Video
Specifikacije
- Znamka
- Genelec
- Model
- 1236A
- Kategorija
- Studio › Studijski monitorji
Audio
- Frequency response (-6 dB)
- 17.5 Hz - 26 kHz
- Accuracy of frequency response
- ±2 dB (21 Hz - 20 kHz)
- Peak SPL (per pair, at 2 m)
- ≥136 dB
- Short term max SPL (at 1 m)
- ≥130 dB
- Long term max SPL (at 1 m)
- ≥125 dB
- Self-generated noise
- ≤5 dB SPL (A-weighted, 2 m on axis)
- Group delay (analog input, Extended Phase Linearity off)
- 5.2 ms
Drivers
- Bass drivers
- 2 x cone, ⌀ 458 mm
- Midrange drivers
- 2 x cone, ⌀ 125 mm
- Tweeter
- Compression, ⌀ 25 mm
- Enclosure
- MDF, reflex port
Amplification
- Bass amplifier
- 2 x 1000 W Class D
- Midrange amplifier
- 2 x 400 W Class D
- Treble amplifier
- 250 W Class D
- Amplifier unit size (each)
- H 132 x W 483 x D 286 mm (3U rack)
- Amplifier unit weight (each)
- 11.2 kg / 24.7 lb
Inputs
- Analog input
- 1 x XLR female, balanced, 10 kOhm
- Digital input
- 1 x XLR female AES/EBU, 110 Ohm
Outputs
- Digital output / thru
- 1 x XLR male AES/EBU, 110 Ohm
Connectivity
- GLM control
- 2 x RJ45 (CAT5) GLM Network
Power
- Mains voltage
- 100-120 VAC / 220-230 VAC, 50/60 Hz
- Power consumption, full output
- 2400 W
- Power consumption, idle
- ≤40 W
- Power consumption, ISS active
- ≤6 W
Physical
- Dimensions (H x W x D)
- 1180 x 960 x 650 mm
- Weight
- 182 kg / 401.2 lb
In the box
- Contents
- 1 x 1236A monitor, 1 x calibrated RAM-XL amplifier unit
- Cables
- Mains 1.8 m, RJ45 5 m and 10 m, 2 x 4-pole Speakon 10 m
- Documentation
- Operating manual
- Warranty
- 2 years, plus 3 years extended when registered on MyGenelec