1236A
The 1236A is a very large, three-way active studio main monitor in the Genelec SAM range, with a separate rack-mounted amplifier unit and GLM network control. It is aimed at large control rooms where several listeners share one sweet spot.
- Three-way active main monitor with separate RAM-XL amplifier unit
- Class D amps: 2x1000 W bass, 2x400 W mid, 250 W treble
- Frequency response 17.5 Hz–26 kHz (-6 dB)
- Short term max SPL ≥130 dB at 1 m
- Analog XLR and AES/EBU XLR in, AES/EBU out, 2x RJ45 for GLM
- GLM/AutoCal room calibration needs a 9320A or GLM Calibration Kit
Fotky
7Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať 1236A, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The 1236A is a floor-standing main monitor built around two 458 mm bass cones, two 125 mm midrange cones and a 25 mm compression tweeter in a reflex-ported MDF enclosure. Each driver group has its own Class D amplification and an active crossover, and a Directivity Control Waveguide shapes dispersion to give a wide listening area with flat off-axis response.
The amplifiers sit in a separate individually calibrated RAM-XL unit made up of three 3U rack-mounted modules: bass (2 x 1000 W), midrange (2 x 400 W) and treble (250 W). Driver protection circuitry limits output when levels or voice-coil temperatures reach safe limits, and Intelligent Signal Sensing puts the monitor into a low-power sleep state when no signal is present.
The monitor belongs to the Smart Active Monitoring family. Two RJ45 ports connect it to a GLM network, where the GLM software handles level, distance delay and room response compensation through AutoCal 2. Calibration needs GLM software plus either a 9320A SAM Reference Controller or a GLM Calibration Kit, both sold separately. Audio comes in over balanced analog XLR or AES/EBU digital XLR, and a digital XLR output passes the signal on.
Video
Parametre
- Značka
- Genelec
- Model
- 1236A
- Kategória
- Štúdio › Štúdiové monitory
Audio
- Frequency response (-6 dB)
- 17.5 Hz - 26 kHz
- Accuracy of frequency response
- ±2 dB (21 Hz - 20 kHz)
- Peak SPL (per pair, at 2 m)
- ≥136 dB
- Short term max SPL (at 1 m)
- ≥130 dB
- Long term max SPL (at 1 m)
- ≥125 dB
- Self-generated noise
- ≤5 dB SPL (A-weighted, 2 m on axis)
- Group delay (analog input, Extended Phase Linearity off)
- 5.2 ms
Drivers
- Bass drivers
- 2 x cone, ⌀ 458 mm
- Midrange drivers
- 2 x cone, ⌀ 125 mm
- Tweeter
- Compression, ⌀ 25 mm
- Enclosure
- MDF, reflex port
Amplification
- Bass amplifier
- 2 x 1000 W Class D
- Midrange amplifier
- 2 x 400 W Class D
- Treble amplifier
- 250 W Class D
- Amplifier unit size (each)
- H 132 x W 483 x D 286 mm (3U rack)
- Amplifier unit weight (each)
- 11.2 kg / 24.7 lb
Inputs
- Analog input
- 1 x XLR female, balanced, 10 kOhm
- Digital input
- 1 x XLR female AES/EBU, 110 Ohm
Outputs
- Digital output / thru
- 1 x XLR male AES/EBU, 110 Ohm
Connectivity
- GLM control
- 2 x RJ45 (CAT5) GLM Network
Power
- Mains voltage
- 100-120 VAC / 220-230 VAC, 50/60 Hz
- Power consumption, full output
- 2400 W
- Power consumption, idle
- ≤40 W
- Power consumption, ISS active
- ≤6 W
Physical
- Dimensions (H x W x D)
- 1180 x 960 x 650 mm
- Weight
- 182 kg / 401.2 lb
In the box
- Contents
- 1 x 1236A monitor, 1 x calibrated RAM-XL amplifier unit
- Cables
- Mains 1.8 m, RJ45 5 m and 10 m, 2 x 4-pole Speakon 10 m
- Documentation
- Operating manual
- Warranty
- 2 years, plus 3 years extended when registered on MyGenelec