1032C
Two-way active nearfield studio monitor with a 250 mm bass driver and 25 mm metal dome tweeter in a soffit-mountable MDF cabinet. A networked Smart Active Monitor for music production, post production and broadcast that can be calibrated to the room through GLM software.
- Two-way active monitor, 250 mm woofer and 25 mm metal dome tweeter
- 250 W + 150 W Class D amplification
- Frequency response 33 Hz – 23 kHz (-6 dB)
- Analogue and AES/EBU XLR inputs, AES/EBU output
- GLM network control and AutoCal room calibration
- Universal power supply, 100–240 VAC
Fotók
5Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy 1032C modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The 1032C is a two-way active monitor that combines the cabinet styling of the 1000 series with digital connectivity, a universal power supply and Class D amplification. Each driver has its own amplifier, with 250 W for the bass cone and 150 W for the metal dome tweeter, behind an active crossover and a Directivity Control Waveguide.
As a Smart Active Monitor it works with Genelec Loudspeaker Manager (GLM) software, which handles level, distance delay and room response compensation, including automated AutoCal calibration. Calibration needs GLM software plus either a 9320A SAM Reference Controller or a GLM Calibration Kit, both sold separately. Settings can be stored in the monitor if the GLM network is disconnected.
Connections are a balanced analogue XLR input, an AES/EBU digital XLR input with a digital output or thru connector, and two RJ45 ports for the GLM control network. Protection circuitry limits the output to guard the drivers, and Intelligent Signal Sensing puts the monitor into a low-power sleep state when no signal is present.
Videó
Műszaki adatok
- Márka
- Genelec
- Modell
- 1032C
- Kategória
- Stúdió › Stúdiómonitorok
Audio
- Frequency response (-6 dB)
- 33 Hz - 23 kHz
- Accuracy of frequency response
- ±2.5 dB (40 Hz - 20 kHz)
- Peak SPL (per pair, at 1 m)
- ≥124 dB
- Short term max SPL
- ≥114 dB
- Long term max SPL
- ≥104 dB
- Self-generated noise
- ≤5 dB SPL
- Harmonic distortion
- 50…100 Hz ≤1 %; > 100 Hz ≤0.5 %
- Group delay (analog input, Extended Phase Linearity off)
- 3.2 ms
Drivers
- Bass driver
- 250 mm cone, magnetically shielded
- Treble driver
- 25 mm metal dome, magnetically shielded
- Enclosure material
- MDF
Amplification
- Bass amplifier
- 250 W Class D
- Treble amplifier
- 150 W Class D
Inputs
- Analog input
- 1 x XLR female, balanced, 10 kOhm
- AES/EBU input
- 1 x XLR female, 110 Ohm
Outputs
- AES/EBU output / thru
- 1 x XLR male, 110 Ohm
Connectivity
- GLM control
- 2 x RJ45 (CAT5) GLM Network
Power
- Mains voltage
- 100-240 VAC 50/60 Hz
- Power consumption, full output
- 200 W
- Power consumption, idle
- ≤11 W
- Power consumption, ISS active
- ≤1 W
Physical
- Height
- 495 mm
- Width
- 320 mm
- Depth
- 290 mm
- Weight
- 17 kg / 37.5 lb
In the box
- Contents
- 1 x 1032C monitor, 1 x mains cable 1.8 m, 1 x RJ45 cable 5 m, 1 x operating manual
- Warranty
- 2 years parts-and-labour (5 years with free registration)