PLASMA Rack
A 1U rackmount analog distortion unit that runs the signal through a xenon-filled plasma tube driven at up to 5,500 volts. It is aimed at studio and professional users, such as sound designers, synth and guitar players, who want a distinctive, harmonically rich distortion.
- 1U rack unit with xenon plasma tube distortion
- Plasma discharge voltage of 5.5 kV
- Balanced combo and unbalanced instrument inputs with -20 dB pad
- Three FX loops with send and return jacks
- MIDI in/out/thru and expression pedal input
- Baxandall EQ and tremolo with rate up to 2600 Hz
Billeder
8Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en PLASMA Rack, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The Plasma Rack passes the incoming signal through a high-voltage step-up flyback transformer, which turns it into a series of electrical discharges inside a sealed, xenon-filled tube. A receiver picks up those discharges and converts them back to audio-level signal, giving a heavy distortion rich in harmonics and overtones. The unit sits in a single rack space and is built for studio and professional use.
It has an unbalanced instrument input and a balanced combo mic/line input with a switchable -20 dB pad, plus unbalanced and balanced outputs. Three FX loops (send and return pairs) allow other processors to be placed in the chain. Shaping tools include a three-band Baxandall EQ that can be controlled over MIDI, a tremolo with a rate up to 2600 Hz, and a depth control that blends in or out of phase between the clean and distorted signals.
MIDI in, out and thru on 5-pin DIN connectors and an expression pedal input provide external control. The internal switch-mode power supply accepts 90–245 VAC at 50/60 Hz, so the unit can be used across regions.
Video
Specifikationer
- Mærke
- Gamechanger Audio
- Model
- PLASMA Rack
- Kategori
- Effekter og pedaler
Unbalanced input
- Connector
- Tip-sleeve 1/4" jack
- Impedance
- 1MΩ
- Maximum input level
- +11 dBu
- Maximum undistorted input level
- 0 dBu (Gain setting at minimum)
Balanced input
- Connector
- Combo connector: Female XLR and Tip-Ring-Sleeve ¼" (Pin 2 and Tip hot)
- Impedance
- 4.38 kΩ; 1.5 kΩ (PAD switch on)
- Maximum input level
- +17 dBu (Clamped by protection devices); +37 dBu (PAD switch on, clamped by protection devices)
- Maximum undistorted input level
- +2dBu (Gain setting at minimum); +22 dBu (PAD switch on, Gain setting at min)
Outputs
- Unbalanced output connector
- Tip-Sleeve ¼" Jack
- Unbalanced output impedance
- 220Ω
- Unbalanced maximum output level
- +7 dBu
- Balanced output connector
- Male XLR (Pin 2 Hot)
- Balanced output impedance
- 200 Ω
- Balanced maximum output level
- +10 dBu
FX loops (1-3)
- Send connector
- Tip-Sleeve ¼" Jack
- Send maximum output level
- +12 dBu (Line level); -6 dBu (Instrument level)
- Return connector
- Tip-Sleeve ¼" Jack
- Return impedance
- 1 MΩ
Connectivity
- MIDI in/out/through
- 5-pin DIN (180 degree)
- Expression pedal
- Tip-Ring-Sleeve ¼" jack, for potentiometer-based pedals
Audio
- Preamp gain range
- -26 to +12 dB
- Volume control gain
- -80 to +12 dB
- Pad attenuation
- -20 dB, balanced input only
- EQ
- Baxandall, MIDI controllable
- EQ low
- 10 Hz, -20 to 20 dB Low-pass shelving filter
- EQ mid
- 600 Hz, -6 to 6 dB
- EQ high
- 20 kHz, -10 to 10 dB, High-pass shelving filter
- Tremolo rate range
- 0.85 to 2600 Hz
- Frequency response
- 30 Hz to 20 kHz (±3 dB)
- Signal to noise ratio
- 69 dB clean channel (A weighted); 78 dB drive channel (A weighted)
- Tube gas
- Xenon
- Discharge voltage
- 5.5 kV
Power
- Power supply type
- Universal, switch – mode
- Operating voltage
- 90 – 245 VAC, 50/60 Hz
- Power consumption
- 60 W
Physical
- Dimensions
- 440mm (W) x 255mm (D) x 40mm (H)
- Weight
- 4.1 kg
- Operating temperature
- 0º to 40º C
- Shipping box dimensions
- 540mm (W) x 380mm (D) x 100mm (H)
- Shipping weight
- 4.5 kg
In the box
- Power cable
- Suitable for your region