PLASMA Drive Eurorack
A 16HP Eurorack distortion module that passes the audio signal through a xenon-filled tube, using high-voltage discharges to produce clipping. Made with Erica Synths, it suits modular players and guitarists who want an unconventional, heavy distortion with CV control.
- Distortion through a xenon-filled plasma tube
- Signal boosted to 3000V before conversion back to audio
- CV control of distortion level and dry/wet mix
- Octave Up and Two-Octave Down tracking oscillators
- Octave functions switchable manually or by trigger
- 16HP wide, 45 mm deep
Fotografije
6Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao PLASMA Drive Eurorack, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The Plasma Drive Eurorack takes the PLASMA distortion concept into modular format. Rather than clipping with diodes, transistors or valves, it boosts the incoming signal to 3000V and turns it into continuous high-voltage discharges inside a xenon-filled tube. The discharges are converted back into an analog audio signal.
The module adds CV control over the amount of distortion and the dry/wet mix, so it can be patched alongside other Erica Synths modules. Tracking oscillators provide an Octave Up and a Two-Octave Down function for extra harmonics, and these can be switched on or off by hand or with trigger signals. Tone shaping is handled by low and high frequency boost/cut controls.
The module fits 16HP of rack space and is 45 mm deep. It connects through a standard Eurorack power ribbon cable and draws about 250mA. A power supply is not included.
Videozapis
Specifikacije
- Marka
- Gamechanger Audio
- Model
- PLASMA Drive Eurorack
- Kategorija
- Efekti i pedale
Inputs
- Audio input level
- up to 20V ptp
- CV input level
- -10V - +10V
- Octave trigger inputs
- Octave Up / Two-Octave Down on/off via trigger signals
Audio
- Distortion method
- Xenon-filled tube, high-voltage discharges
- Tube voltage
- 3000V
- EQ low freq boost/cut
- ±9dB, 600Hz corner freq.
- EQ hi freq boost/cut
- ±10dB, 1.5kHz corner freq.
- Octave functions
- Octave Up, Two-Octave Down (tracking oscillators)
- CV control
- Distortion level, dry/wet mix
Power
- Power connection
- Eurorack PSU ribbon cable
- Supply requirement
- ±12VDC, 300 mA (positive rail 200 mA, negative rail 100 mA)
- Power consumption
- 135mA@+12V, 87mA@-12V
- Approx. current draw
- around 250mA
Physical
- Format
- Eurorack
- Panel width
- 16HP
- Module depth
- 45 mm
Warranty
- Warranty
- Lifetime Warranty
- Money-back guarantee
- 30 Day Money Back Guarantee
- Collaboration
- Made with Erica Synths
In the box
- Power supply
- Not included