Vintage Classic Gold XII SP
Fyne Audio Discontinued

Vintage Classic Gold XII SP

Floorstanding speaker pair from Fyne Audio's Vintage Classic Gold SP series, built around a 300mm IsoFlare point-source driver with a titanium compression tweeter in a walnut-veneer birch ply cabinet. Aimed at hi-fi listeners who want a large, high-sensitivity speaker with a retro look.

  • 300mm IsoFlare point-source driver with FyneFlute surround
  • 75mm titanium alloy dome compression tweeter
  • Sensitivity 96dB, 8 Ohm nominal impedance
  • Recommended amplifier power 20-350W RMS
  • Walnut veneer birch ply cabinet with BassTrax downward-firing design
  • Sold as a pair, 51kg each
Sell one like this

Photos

7

Listings

No listings of this model yet

When someone sells a Vintage Classic Gold XII SP, the listings and the sales history will show here.

Sell one like this

Description

The Vintage Classic Gold XII SP is a two-way floorstanding loudspeaker sold as a pair. It uses a 300mm IsoFlare point-source driver with a multi-fibre bass/midrange cone and FyneFlute surround. A 75mm titanium alloy dome compression tweeter sits at its centre, and the drive units use a neodymium magnet system. Crossover is at 750Hz.

The cabinet is high-density birch ply with extensive internal bracing, finished in walnut veneer with gold accents. It has a downward-firing port in a twin-cavity design with a BassTrax Tractrix diffuser. Dr. Paul Mills' signature is engraved on the front control plate trim. Two adjustments are provided: high-frequency energy and presence, each +/- 3dB.

Sensitivity is 96dB with an 8 Ohm nominal impedance, and the recommended amplifier power is 20 to 350 Watts RMS. The crossover is a bi-wired passive low-loss design with deep cryogenic treatment, so the speaker connects to an amplifier through bi-wire capable terminals.

Video

Specifications

Brand
Fyne Audio
Model
Vintage Classic Gold XII SP
Category
Hi-fi and home audio › Speakers

Drivers

System type
2 way, downwards firing port, twin cavity, BassTrax Tractrix diffuser
Drive unit complement
1 x 300mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 75mm titanium alloy dome compression tweeter, neodymium magnet system
Crossover frequency
750Hz
Crossover type
Bi-wired passive low loss, 2nd order low pass, 2nd order high pass. Deep Cryogenic Treatment

Audio

Frequency response (-6dB typical in room)
25Hz- 26kHz
Sensitivity (2.83 Volt @ 1m)
96dB
Nominal impedance
8 Ohm
System adjustments
High frequency energy (750Hz - 26kHz) +/- 3dB; Presence (2.5kHz - 5.0kHz) +/- 3dB

Power

Recommended amplifier power (Watt RMS)
20 - 350
Continuous power handling (Watt RMS)
175

Physical

Dimensions - HxWxD
948 x 550 x 421mm (37.3 x 21.7 x 16.6")
Net weight - each
51kg
Finishes
Walnut
Cabinet construction
High density birch ply with extensive internal bracing
S-Trax position (from cabinet front edge)
136mm (5.4")
SuperTrax position (from cabinet front edge)
112mm (4.4")

General

SKU
F80000975
Series
Vintage Classic Gold SP Series
Supplied as
Per pair

Data: fyneaudio.com; photos: Fyne Audio product page · updated 2026-10-13 · Found a mistake? Write to us