FA501iC
The FA501iC is a 6-inch two-way in-ceiling/in-wall loudspeaker from Fyne Audio's FA500iC series. It suits custom-install and home-theatre setups that need a shallow, paintable speaker with an IsoFlare point-source driver.
- 6" (150mm) IsoFlare point-source driver
- 25mm titanium dome compression tweeter
- Passive 2nd order low pass, 1st order high pass crossover
- 99mm depth behind mounting surface
- Round and square paintable grilles
- 8 Ohm, 89dB sensitivity, 30 - 125 W RMS amplifier
Zdjęcia
6Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi FA501iC, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The FA501iC is a two-way flush-mount loudspeaker for ceilings and walls. It uses a 150mm (6") IsoFlare point-source driver, with a 25mm titanium dome compression tweeter at the centre of a multi-fibre bass/midrange cone and a FyneFlute surround. The crossover is tuned for an infinite-baffle, flush-mount position.
The cabinet is shallow, needing 99mm behind the mounting surface, and fixes in place with clamps that accept surfaces 5 - 50mm thick. A round grille and a square low-profile grille are both supplied, and both can be painted so the speaker blends into the room. A cut-out template and a manual are available as downloads.
The speaker is passive and connects to a separate amplifier. It has an 8 Ohm nominal impedance and 89dB sensitivity, and the recommended amplifier power is 30 - 125 W RMS. The crossover is a passive design with a 1.7kHz crossover frequency.
Specyfikacja
- Marka
- Fyne Audio
- Model
- FA501iC
- Kategoria
- Hi-Fi i audio domowe › Głośniki
Audio
- System type
- 2 way IsoFlare loudspeaker for in ceiling or in wall application
- Drive unit complement
- 1 x 150mm (6") IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm titanium dome compression tweeter
- Frequency response (-6dB typical in room)
- 40Hz - 34kHz
- Sensitivity (2.83 Volt @ 1m)
- 89dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 1.7kHz
- Crossover type
- Passive 2nd order low pass, 1st order high pass
- Suggested min volume
- 12 L
Power
- Recommended amplifier power (Watt RMS)
- 30 - 125
- Peak power handling (Watt)
- 250
- Continuous power handling (Watt RMS)
- 62.5
Physical
- Dimensions - Dia x Depth
- 224 x 101mm (8.8 x 4.0")
- Square grille dimensions
- 233 x 233mm (9.2 x 9.2")
- Round grille diameter
- 232mm (9.1")
- Net weight - each
- 2.3kg (5.0lbs)
Installation
- Cut-out diameter
- 208mm (8.2")
- Depth behind mounting surface
- 99mm (4.0")
- Clamp travel
- 5 - 50mm (0.2 - 2.0")
- Grille options
- Round Grille, Square Grille
In the box
- Supplied
- Installation clamps, round and square paintable grilles
- Sold as
- Single unit