FA302iC
The FA302iC is a two-way co-axial in-ceiling or in-wall loudspeaker with a 200mm (8") multi-fibre bass/midrange driver and a 25mm polyester dome tweeter on a steerable pod. It suits custom-install and home theatre setups where a flush, paintable speaker is wanted.
- 200mm multi-fibre bass/midrange with 25mm co-axial dome tweeter
- Steerable tweeter pod for directing the sound
- Frequency response 37Hz - 28kHz (-6dB, in room)
- 8 Ohm, 90dB sensitivity, 60W RMS continuous
- Cut-out diameter 248mm, clamp travel 5 - 50mm
- Paintable magnetic grille, round or optional square
Ritratti
6Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ FA302iC, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The FA302iC is a home-install loudspeaker built around a 200mm multi-fibre bass/midrange cone with a FyneFlute roll surround and a 25mm soft dome polyester tweeter mounted co-axially. The tweeter pod can be angled to direct the sound, and the crossover is tuned for placement in a ceiling or wall. It is derived from the maker's larger F300 series models and is specified to reach below 40Hz.
Installation is handled with easy-to-fit clamps, spring cable terminals and a supplied cut-out template. The cut-out diameter is 248mm and the clamp range covers surfaces 5 to 50mm thick, with 112.5mm of depth needed behind the mounting surface. A low-profile magnetic grille sits almost flush with the surface and can be painted to match the room. A round grille is standard and a square grille is available as an optional extra.
The speaker is rated for 8 ohm nominal impedance and 90dB sensitivity, with recommended amplifier power of 25 to 120 W RMS. It connects to an amplifier through the spring terminals, and a manual and cut-out template are offered as downloads.
Speċifikazzjonijiet
- Marka
- Fyne Audio
- Mudell
- FA302iC
- Kategorija
- Hi-Fi u awdjo tad-dar › Speakers
Audio
- System type
- 2 way co-axial loudspeaker for in ceiling or in wall application, steerable HF unit
- Drive unit complement
- 1 x 200mm multi-fibre bass / midrange cone, FyneFlute surround with 25mm Co-axial polyester dome tweeter
- Frequency response (-6dB typical in room)
- 37Hz - 28kHz
- Sensitivity (2.83 Volt @ 1m)
- 90dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 2.8kHz
- Crossover type
- Passive 2nd order low pass, 1st order high pass
- Suggested min volume
- 15 L
Power
- Recommended amplifier power (Watt RMS)
- 25 - 120
- Peak power handling (Watt)
- 240
- Continuous power handling (Watt RMS)
- 60
Physical
- Dimensions - Dia x Depth
- 273 x 115mm (10.7 x 4.5")
- Square grille dimensions
- 281 x 281mm (11.1 x 11.1")
- Round grille diameter
- 281mm (11.1")
- Net weight - each
- 2.1kg (4.7lbs)
Installation
- Cut-out diameter
- 248mm (9.8")
- Depth behind mounting surface
- 112.5mm (4.4")
- Clamp travel
- 5 - 50mm (0.2 - 2.0")
- Grille options
- Round Grille; Square Grille - Optional Extra
- SKU
- F8000028
Downloads
- Documents
- FA300iC and FA500iC Manual; FA302iC and FA502iC Cutout Template