F55E
A compact floorstanding 2.5-way speaker with a 125 mm IsoFlare point-source driver and a downward-firing BassTrax port. It suits small rooms and stereo or home theatre use where placement flexibility matters.
- 2.5-way floorstanding speaker, sold per pair
- 125 mm IsoFlare point-source driver with 19 mm titanium tweeter
- Downward-firing port with BassTrax Tractrix diffuser
- Sensitivity 88 dB, nominal impedance 8 ohm
- Suits amplifiers of 30–120 W RMS
- Black Ash finish; MDF cabinet
Bilder
5Annonser
Ingen annonser for denne modellen ennå
Når noen selger en F55E, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The F55E is a floorstanding loudspeaker in the F500E range, sold as a pair. It uses a 125 mm IsoFlare point-source driver, combining a multi-fibre bass/mid cone with a 19 mm titanium dome compression tweeter. A second 125 mm multi-fibre bass driver supports the low end in a 2.5-way layout.
A downward-firing port with a BassTrax Tractrix diffuser spreads low frequencies around the room, so positioning is less critical. The cabinet is MDF and the available finish is Black Ash. The crossover points are 350 Hz and 1.8 kHz, with a 2nd order low-pass and 1st order high-pass design.
The speaker connects to an amplifier rated for 30 to 120 W RMS and has a nominal impedance of 8 ohms. Continuous power handling is 60 W RMS. Sensitivity is 88 dB (2.83 V at 1 m). The cabinet stands 925 mm tall and weighs 11.9 kg each.
Video
Spesifikasjoner
- Merke
- Fyne Audio
- Modell
- F55E
- Kategori
- Hi-Fi og hjemmelyd › Høyttalere
Audio
- System type
- 2 ½ way, downwards firing port, with BassTrax TM Tractrix diffuser
- Frequency response (-6dB typical in room)
- 42Hz – 38kHz
- Sensitivity (2.83 Volt @ 1m)
- 88dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 350Hz & 1.8kHz
- Crossover type
- 2nd order low pass, 1st order high pass
- S-Trax position (from cabinet front edge)
- 32mm (0.08")
Drivers
- Drive unit complement
- 1 x 125mm IsoFlare TM, multi-fibre bass / mid with 19mm titanium dome compression tweeter. 1 x 125mm multi-fibre bass
Power
- Recommended amplifier power (Watt RMS)
- 30 – 120
- Continuous power handling (Watt RMS)
- 60
Physical
- Dimensions (H x W x D)
- 925 x 210 x 236mm (36.4 x 8.3 x 9.3")
- Net weight, each
- 11.9kg (26.2lbs)
- Finishes
- Black Ash
- Sold as
- Per pair
- Series
- F500E Series