F502S LCR
Fyne Audio M’għadux jinbiegħ

F502S LCR

Wall-mountable left/centre/right loudspeaker from the F500S range, built around a 150mm IsoFlare bass/mid driver with a 25mm magnesium dome tweeter and an auxiliary bass radiator instead of a port. Intended for home cinema setups, including placement close to a wall.

  • Left, centre or right channel use; wall-mountable
  • 150mm IsoFlare driver with 25mm magnesium dome tweeter
  • Auxiliary bass radiator instead of a port
  • Sensitivity 90dB, 8 ohm nominal impedance
  • Amplifier power 30–150W RMS recommended
  • Black Oak, Natural Walnut or Piano Gloss Black
Biegħ wieħed bħal dan

Ritratti

8

Reklami

Għad m’hemmx reklami ta’ dan il-mudell

Meta xi ħadd ibigħ F502S LCR, ir-reklami u l-istorja tal-bejgħ jidhru hawn.

Biegħ wieħed bħal dan

Deskrizzjoni

The F500S LCR is a 2½-way loudspeaker that can be used as a left, centre or right channel in a home theatre system. Its drive units are a 150mm IsoFlare bass/mid driver with a 25mm magnesium dome compression tweeter, plus a 150mm bass driver and a 150mm auxiliary bass radiator (ABR). The ABR takes the place of a conventional port, which allows placement close to a wall or on a wall mount.

The cabinet is made from high-rigidity MDF with extensive internal bracing. Crossover points are 250Hz and 1.7kHz, using a 2nd order low-pass and a 1st order high-pass design. Sensitivity is 90dB at 2.83V/1m with a nominal impedance of 8 ohms, and the recommended amplifier power is 30 to 150W RMS.

The speaker measures 200 x 530 x 152mm and weighs 10.2kg. It is offered in three finishes: Black Oak and Natural Walnut real wood veneer, or Piano Gloss Black. It is sold as a single unit and connects to an amplifier or AV receiver through speaker terminals.

Speċifikazzjonijiet

Marka
Fyne Audio
Mudell
F502S LCR
Kategorija
Hi-Fi u awdjo tad-dar › Speakers

Audio

System type
2 ½ way, with auxiliary bass radiator (ABR)
Sensitivity (2.83 Volt @ 1m)
90dB
Nominal impedance
8 Ohm
Frequency response (-6dB typical in room)
56Hz – 34kHz
Crossover frequency
250Hz & 1.7kHz
Crossover type
2nd order low pass, 1st order high pass

Drivers

Drive unit complement
1 x 150mm IsoFlare TM bass/mid with 25mm magnesium dome compression tweeter. 1 x 150mm bass. 1 x 150mm ABR.

Power

Recommended amplifier power (Watt RMS)
30 - 150
Continuous power handling (Watt RMS)
75

Physical

Dimensions (H x W x D)
200 x 530 x 152mm (7.9 x 20.9 x 6.0")
Net weight (each)
10.2kg (22.5lbs)
Cabinet construction
High-rigidity MDF with extensive internal bracing
Finishes
Black Oak, Natural Walnut, Piano Gloss Black
SKU
F8000085
Series
F500S Series

Data: fyneaudio.com; ritratti: Fyne Audio product page · aġġornat 2026-10-13 · Sibt żball? Iktbilna