F302i
Floorstanding two-way, rear-ported speaker pair with a 150mm multi-fibre bass/mid driver and a 25mm titanium dome tweeter. It is an updated version of the F302 with a revised tweeter and crossover, aimed at hi-fi and home theatre listeners.
- 2-way, rear-ported floorstanding speaker, sold as a pair
- 150mm multi-fibre bass/mid driver with 25mm titanium dome tweeter
- Sensitivity 90dB, 8 ohm nominal impedance
- Frequency response 36Hz-34kHz (-6dB typical in room)
- Recommended amplifier power 40-180W RMS
- Magnetic grilles store on the rear of the cabinet
Fotografije
7Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal F302i, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The F302i is a floorstanding loudspeaker sold as a pair. It uses a two-way, rear-ported design with a 150mm multi-fibre bass/mid driver and a 25mm titanium dome tweeter, crossing over at 3.2kHz. Compared with the earlier F302, it has an upgraded tweeter and a revised crossover, which extends the high frequencies and gives a more detailed treble.
The cabinet measures 932 x 233 x 308mm and weighs 13.3kg each. Sensitivity is 90dB (2.83V at 1m) with an 8 ohm nominal impedance, and the speaker is rated for 60W RMS continuous power, with a recommended amplifier range of 40 to 180W RMS. In-room frequency response is given as 36Hz to 34kHz (-6dB).
Magnetic grilles can be stored on the rear of the cabinet while listening, a feature carried over from the F500 Series. The speaker is offered in Black Ash, Light Oak and Walnut finishes and suits both stereo hi-fi systems and home theatre setups. It is part of the F300i Series.
Video
Specifikacije
- Znamka
- Fyne Audio
- Model
- F302i
- Kategorija
- Hi-Fi in domači avdio › Zvočniki
Audio
- System type
- 2 way, rear ported
- Drive unit complement
- 1 x 150mm multi-fibre bass / mid, 1 x 25mm titanium dome tweeter
- Frequency response (-6dB typical in room)
- 36Hz-34kHz
- Sensitivity (2.83 Volt @ 1m)
- 90dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 3.2kHz
- Crossover type
- 2nd order low pass, 3rd order high pass
Power
- Recommended amplifier power (Watt RMS)
- 40 - 180
- Continuous power handling (Watt RMS)
- 60
Physical
- Dimensions (H x W x D)
- 932 x 233 x 308mm (36.7 x 9.2 x 12.1")
- Net weight (each)
- 13.3kg (29.3lb)
- Finishes
- Walnut / Black Ash / Light Oak
- Dimensions include
- Grille, terminals and plinth; excludes spikes
General
- SKU
- F8000052
- Series
- F300i Series
- Sold as
- Per pair
- Grille storage
- Magnetic, on rear of cabinet